Kenmore 10656714500 Installation Instructions, Excessive Weight Hazard, Remove the Packaging

Models: 10656712500 10656702500 10656703500 10656704500 10656706500 10656709500 10656714500 10656716500 10656713500 10656719500 Elite

1 80
Download 80 pages 26.09 Kb
Page 4
Image 4
INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Remove the Packaging

Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information see "Refrigerator Safety."

When Mov}ng Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cieaning or service, be sure to protect the floor. A{ways pu[[ the refrigerator straight out when moving it.

Do not wigg{e or "walk" the refrigerator when trying to move it, as floor damage could occur.

Explosion Hazard

Keep f}ammable mateda{s and vapors, such as gasoline, away from refrigeratoro

Failure to do so can resu}t in death, explosion, or fire°

To ensure proper ventilation for your refrigerator, allow for 1/_,, (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).

Clean Before Using

After you remove all of the packaging materials, clean the inside of your refrigerator before using it. See the cleaning instructions in "Refrigerator Care."

Important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping.

For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal Glass shelves and covers are heavy. Use specia{ care when removing them to avoid impact from dropping.

112"(1.25 crn)

I I --I!

J

2" (5.08 _)

Page 4
Image 4
Kenmore 10656714500, Elite Installation Instructions, Excessive Weight Hazard, Remove the Packaging, Clean Before Using