is on.

The fader or balance settings are set all the way to one side.

The input/output wires or wiring harness are connected

Turn off Attenuator.

Reset the fader and/or balance settings.

Reconnect the input/output wires or the wiring harness

correctly. See the section on <INSTAllATION MANUAL>.

One of the speaker wires is being pinched by a screw in the car.

The speakers are not wired correctly.

The car antenna is not extended.

The antenna control wire is not connected.

The battery wire has not been connected to the proper terrninal.

The ignition and battery wire are incorrectly connected.

The sl)un~/pict~r~ skips .on II DVD/Vc::D/~D. .

.The disc is scratched or dirty.

. Randorn play has been selected.

The VCD disc being played is not cornpatible with P.Se.

The DVD disc being played does not contain the recording of subtitles.

The DVD disc being played does not contain the recording of rnore than one audio (or subtitle)

Check the speaker wiring.

Reconnect the speaker wires so that each output terrninal is connected to a different speaker.

Pull the antenna out all the way.

Connect the wire correctly, referring to the section on

<INSTAllATION MANUAL>.

Connect the wire correctly, referring to the section on

<INSTALLATION MANUAL>.

Connect the wire correctly, referring to the section on

<iNSTALLATION MANUAl>.

Clean the disc, referring to the section on <Disc cleaning> (see page 6).

Menu playback is available only with VCD discs recorded with P.S.C.

The subtitle cannot be displayed when the DVD disc being played does not contain the recording of subtitles.

The voice (or subtitle) language cannot be changed when the DVD disc being played does not contain the recording of rnore than one voice (or subtitle) language.

English 97

Page 97
Image 97
Kenwood DDX7045 instruction manual Slun~/pict~r~ skips .on II DVD/VcD/~D, Check the speaker wiring, Is on