Kenwood DDX7045 instruction manual ~C?neCf1trol, However,if you haveset the Area to Reverse

Sound Effects Menu

~C?neC()f1trol

You can set the front and rear audio source.

[JJ Returns to the Control screen of the previous source.

[2] Calls the Setup Menu. (see page 57)

W Calls the Sound Effects Menu.

mTurns the Zone Function (that sets different source sounds for front and rear speakers) On or Off.

When turned On, ~ and ~ are shown.

[5] Sets the front and rear audio source separately.

~

~

(This button appears when the Zone function is On.)

When the rear speaker sound is switched, the

audio source that is output at the AV OUTPUT terminal is also switched to the same source.

However,if you haveset the "Area" to "Reverse",

the audio source that is output at the AV OUTPUT terminal is switched depending on the front sound source.

[6]Switches the front and rear audio sources.

(This button appears when the Zone function is On.l Use "Reverse" to change over the front and rear audio sources.

~.If the zone function is turned on, the W/(JD

~button appears on each source control screen, with which you can adjust the volume balance

between the front and rear sources.

90 English