Kenwood DPX 504 U, DPX304, DPX404U SRC, VOL, Display, Remarks, Overview, Make a setting, 5Make a setting, Select “Audio Control”, 3Enter Audio Control mode, Exit Function setting mode

Function of DPX504U

Audio Adjustments – DPX504U –

SRC

4 ¢ VOL

Audio Control

You can adjust the following Audio Setting items.

Display			Overview
“Audio Control”
	“SubWoofer Level”		You can set subwoofer level.
			“–15” — “0” — “+15”
	“DSP Set”		“Bypass”: Disables the DSP function.
			“Through”: Enables the DSP function.
	“Equalizer”		Sets the sound quality.
			- <Preset Equalizer curve Select> (page 49).
			- <Manual Equalizer Control> (page 49).
	“Bass Boost”		Sets the Bass Boost level in two steps.
			“OFF”/ “Step1” – “2”
	“HIGHWAY-SOUND”		Compensates the low volume or bass sound
			being lost by road noises to make vocal sound
			clearer.
			Unavailable when the tuner source is selected.
			“OFF”/ “Step1”/ “2”/ “3”
	“Supreme+”		Turns ON/OFF the Supreme plus function.
			Can be set while Music CD source, Audio file
			source of USB and iPod source.
			“ON”/ “OFF”
	“Position”		Compensates the sound environment in
			accordance with the listening position.
			- <Listening Position Selection> (page 50).
			- <Listening Position Fine Adjustments>
			(page 50).
	“Balance”		Adjusts left/right speaker balance.
			(Left) “L15” — “0” — “R15” (Right)
	“Fader”		Adjusts front/rear speaker balance.
			(Rear) “R1”5 — “0” — “F15” (Front)
	“2Zone Rear Volume”		Refer to <Dual Zone System> (page 51).
	“SubWoofer”		Turns on/off the subwoofer output.
			“ON”/ “OFF”
	“Detailed Setup”
		“Car Type”	To get clear sound, set the sound environment
		“Speaker Setting”	according to the location and size of physically
		“Car Type Adjust”	installed speakers with reference to the
			followings:
		“X'Over”
			- <Car Type Selection> (page 54).
			- <Speaker Setting> (page 54).
			- <Car Type Fine Adjustments> (page 55).
			- <X’Over Setting> (page 56).

48DPX504U/ DPX404U/ DPX304

“Volume offset”	Sets each source’s volume as a difference from
	the basic volume.
	“–8” — “±0” (AUX: “-8”— “+8”)
“2Zone”	Sets the Dual Zone System.
“2Zone Select”	- <Dual Zone System> (page 51).
“Preset”	Sets the audio preset.
	- <Audio Preset Memory> (page 56).
	- <Audio Preset Recall> (page 57).
	(	: Factory setting)

1Select the source Press the [SRC] button.

Select a source other than “STDBY”.

2Enter Function setting mode Press the [VOL] knob.

3Enter Audio Control mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “Audio Control”.

4Select the setting item to adjust

Turn the [VOL] knob and press it when the desired item is displayed.

5Make a setting

Turn the [VOL] knob to select a setting value, and then press the [VOL] knob.

6Exit Function setting mode

Press the [  ] button for at least 1 second.

Remarks

• DSP Set

When “DSP Set” is set to “Bypass”, the DSP function is disabled , and the colored items can not be set.

• HIGHWAY-SOUND

Increases the volume of faintest sound being lost by road noises to make the sound more audible. Additionally, it accentuates bass sound being lost by road noises to make the bass sound more dynamic.

• Supreme+ (Supreme Plus)

Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding. The bass and vocal sound that are cut off by encoding are supplemented for the reproduction of natural sound quality. Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range.

The bass and vocal sound of Music CD/ iPod is also supplemented.

• Dual Zone System

Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.