Kenwood DPX 504 U, DPX304, DPX404U Display, Remarks, Overview, 4 ¢ LOG VOL, Make a setting, 4Make a setting, Bluetooth Setting, Select “Settings”, 5Exit BT Settings mode

Function of DPX504U with KCA-BT200/BT300 (Optional Accessory)

Bluetooth Setup

4 ¢ LOG VOL

Bluetooth Setting

You can select the following Bluetooth Setting items.

1Press the [LOG] button for at least 1 second.

2Turn the [VOL] knob and press it when the desired item is displayed.

Select “Settings”.3Select the Setting item

Turn the [VOL] knob and press it when the desired item is displayed.

Display			Overview
“Settings”
	“PAIRING”
		“Device	Register a Bluetooth device (pairing).
		Registration”	Refer to <Registering Bluetooth device>
			(page 64).
		“Phone	Select a cell-phone or Bluetooth audio player
		Selection”	connection.
		“Audio Selection”	Refer to <Selecting the Bluetooth device You
			Wish to Connect> (page 65).
		“Special Device	Register a Bluetooth device (pairing).
		Select”	Refer to <Registering Bluetooth device>
			(page 64).
		“Device Delete”	Cancel registration of the Bluetooth device.
			Refer to <Deleting a Registered Bluetooth
			device> (page 66).
	“SMS Download”		Download a short message.
			Refer to <Downloading the SMS> (page 70).
	“Voice Tag”		Registers voice for voice recognition and voice
			to select the Phone number category in Phone
			book.
			- <Adding aVoice Dialing Command> (page 67)
			- <Setting a Voice Command for Category>
			(page 68)
	“Detailed Setup”		Move to detailed item.
		“PIN Code Edit”	Specify the PIN code required when registering
			this unit using the Bluetooth device.
			Refer to <Registering PIN Code> (page 65).
		“Auto Answer”	Answer a call automatically after lapse of the
			preset time interval for automatic answer.
			“OFF”/ “0SEC” – “8SEC” – “99SEC”

“Bluetooth HF/	You can specify output speakers for hands-free
Audio”	voice communication and Bluetooth audio
	sound.
	“Front”: Outputs voice from the front speakers.
	“All”: Outputs voice from the front and rear
	speakers.
“Call Beep”	You can output a beep from the speaker when
	a call comes in.
	“ON”: Beep is heard.
	“OFF”: Beep is canceled.

“BT F/W Update” Display the version of the firmware of this unit.

“Mic Gain”*	Adjust the sensitivity of the microphone for a
	telephone call. Adjust the voice of caller. Setting
	to “+” increases the voice volume.
	“–3” – “0” – “+3”
“NR Level”*	Reduce the noises generated by surrounding
	environment without changing the microphone
	volume. Adjust the voice of caller when it is
	not clear. Setting to “+” increases the noise
	reduction.
	“–3” – “0” – “+3”
“Echo Cancel	Adjust the level of echo cancellation. Setting to
Level“*	“+” increases the echo cancel reduction.
	“–2” – “0” – “+2”
	(	: Factory setting)

* Function of KCA-BT300

4Make a setting

Turn the [VOL] knob to select a setting value, and then press the [VOL] knob.

5Exit BT Settings mode

Press the [LOG] button for at least 1 second.

Remarks

•“Auto Answer”  (Setting the Time Interval for Automatic Answer)

This function automatically answers (responds to) a call after lapse of the preset time interval for automatic answer. “OFF” : Does not answer the phone call automatically.

“0” : Automatically answers the phone call at once.

“1s” – “99s” : Automatically answers the phone call after lapse of 1 – 99 seconds.

62DPX504U/ DPX404U/ DPX304