Kenwood DPX 504 U, DPX304, DPX404U 4Make a setting, Operation example:, 3Select the setting item, Function setting Operation, 5Exit Function setting mode

Function setting Operation

The basic operating procedure for using this function is described below. The individual function items are covered in the operating procedures.

1Select the source Press the [SRC] button.

Function items vary from source to source.

2Enter Function setting mode Press the [VOL] knob.3Select the setting item

Turn the [VOL] knob and press it when the desired item is displayed.

Repeat the operation until your desired setup item is selected.

Operation example:

	3	4	3[	]
		1[VOL]
Exit Settings 2
	Seek Mode
1	1
	Auto Memory 2[VOL]		4[	]
	…
Audio Control
…			1 sec.

In this manual, the above selection is indicated as

Select “Settings”/ “SETTINGS” > “Seek Mode”/ “SEEK MODE”.4Make a settingTurn the [VOL] knob to select a setting value, and then press the [VOL] knob.5Exit Function setting mode

Press the [   ] button for at least 1 second.

English 9