Kenwood DPX 504 U, DPX304, DPX404U VOL, Display, Remarks, Overview, 5 Make a setting, 1 Select the source, Press the [VOL] knob, Press the [SRC] button, Select “AUDIO CONTROL”

Function of DPX404U/ DPX304

Audio Adjustments – DPX404U/ DPX304 –

								“DETAILED SET”
									“LPF	Selects cut off frequency of subwoofer output.
									SUBWOOFER”	“85”/ “120”/ “160”/ “THROUGH” (OFF) Hz
									“SUB-W PHASE”	Selects the phase of subwoofer output.
										“REVERSE” (180°)/ “NORMAL” (0°)
SRC									“SUPREME SET”	Turns on/off the supreme function.
										Can be set while Audio file source of CD/ USB
										(excluding iPod).
										“ON”/ “OFF”
					VOL
									“VOLUME	Sets each source’s volume as a difference from
									OFFSET”	the basic volume.
Audio Control										“–8” — “0” (AUX: “–8” — “0” — “+8”)
										( : Factory setting)
You can adjust the following Audio Setting items.
						1 Select the source
						Press the [SRC] button.
	Display			Overview
	“AUDIO CONTROL”					Select a source other than “STANDBY”.
		“SUBWOOFER SET”		Turns on/off the subwoofer output.		2 Enter Function setting mode
				“OFF”/ ”ON”		Press the [VOL] knob.
		“SYSTEM Q”		Switches between the following preset
						3 Enter Audio Control mode
				equalizer curves.
				“NATURAL”/ “USER”/ “ROCK”/ “POPS”/		Turn the [VOL] knob and press it when the
				“EASY”/ “TOP40”/ “JAZZ”/ “GAME”		desired item is displayed.
				For USER: This appears when Bass level,		Select “AUDIO CONTROL”.
					Middle level, and Treble level are
						4 Select the setting item to adjust
					adjusted.
		“BASS ADJUST”		You can set bass for each source.		Turn the [VOL] knob and press it when the
			“BASS FREQ”	Bass Center Frequency		desired item is displayed.
				40/50/60/70/80/100/120/150 (Hz)		5 Make a setting
			“BASS LEVEL”	Bass level
						Turn the [VOL] knob to select a setting value,
				“–8” — “0” — “+8”
			“BASS Q”	Bass Q Factor		and then press the [VOL] knob.
				1.00/1.25/1.50/2.00		6 Exit Function setting mode
			“BASS EXT”	Bass Extend
						Press the [   ] button for at least 1 second.
				”ON”/ “OFF”
						⁄
		“MID ADJUST”		You can set middle for each source.
			“MID FREQ”	Middle Center Frequency		• The “SUB-W PHASE” item can be made when a setting other
				0.50/1.00/1.50/2.00 (kHz)		than “THROUGH” is selected for the “LPF SUBWOOFER” item.
			“MID LEVEL”	Middle level		Remarks
				“–8” — “0” — “+8”
						• Supreme
			“MID Q”	Middle Q Factor
				1.00/2.00			Technology to extrapolate and supplement with
		“TRE ADJUST”		You can set treble for each source.			proprietary algorithm, the high-frequency range that is
							cut off when encoding at low bit rate (less than 128Kbps,
			“TRE FREQ”	Treble Center Frequency
							Sampling frequency is 44.1kHz).
				10.0/12.5/15.0/17.5 (kHz)
			“TRE LEVEL”	Treble level			Supplementing is optimized by compression format (MP3,
							WMA and AAC) and processed according to bit rate. The
				“–8” — “0” — “+8”
		“BALANCE”		Adjusts left/right speaker balance.			effect is negligible with music that is encoded at high bit
							rate, variable bit rate or has minimal high frequency range.
				(Left) “L15” — “0” — “R15” (Right)
		“FADER”		Adjusts front/rear speaker balance.
				(Rear) “R15” — “0” — “F15” (Front)
		“SUB-W LEVEL”		You can set subwoofer level.
				“–15” — “0” — “+15”

52DPX504U/ DPX404U/ DPX304