Kenwood DPX 504 U, DPX304, DPX404U Enter Security Code mode, Confirm the Security Code, Exit Function setting mode, Deactivating Security Code, Press the [ ] button for at least 1 second

“Clear”/ “CLEAR” is displayed.

The Security Code function deactivates.

9 Exit Function setting mode

Press the [   ] button for at least 1 second.

⁄

• If a wrong security code is entered, “Error”/ “ERROR” is displayed. Enter a correct security code.

Repeat steps 5 and 6, and complete the Security Code.

Select the Security Code numbers Turn the [VOL] knob.

Select the digits to enter Press the [4] or [¢] button.

5

6

7

8 Confirm the Security Code

Press the [VOL] knob for at least 3 seconds.

4 Enter Security Code mode

Press the [VOL] knob for at least 1 second. When “Enter”/ “ENTER” is displayed, “[–][–][–][–]”/ “CODE” is also displayed.

Deactivating Security Code

To deactivate the Security Code function.

1Select the Standby Press the [SRC] button.

Select the “STDBY”/ “STANDBY” display.

2Enter Function setting mode Press the [VOL] knob.

3Select Security Code mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “Initial Settings”/ “INITIAL SET” > “Security Clear”/ “SECURITY CLR”

English 47