Kenwood DPX503 Display, Display, Cabin selection, Setting speaker, 2Select the car type, Turn the Control knob, 1Enter DTA setting mode, 1Enter Cabin select mode

Audio Adjustments

Function of DPX503

Cabin selection

You can compensate the delay of the sound arrival time, which is caused by the installation position of the speakers, by selecting your environment from the following car types;

Car type (rear speaker position)	Display
Not compensating.	“OFF”
Compact car (rear door)	“Compact1”
Compact car (cargo)	“Compact2”
Full size car (rear door)	“Full Size Car1”
Full size car (cargo)	“Full Size Car2”
Station wagon (rear door)	“Wagon1”
Station wagon (cargo)	“Wagon2”
Minivan (rear door)	“Minivan1”
Minivan (cargo)	“Minivan2”
Sport-utility vehicle (rear door)	“SUV1”
Sport-utility vehicle (cargo)	“SUV2”
Minivan Long (rear door)	“Minivan(Long)1”
Minivan Long (cargo)	“Minivan(Long)2”
Calls the value adjusted at <DTA> (page 19).	“User”

1Enter Cabin select modeSelect “SOUND” > “S-SET” > “CABIN”.

For how to select Function Control item, refer to <Function Control> (page 6).

2Select the car type

Turn the Control knob and push the center when the desired item is displayed.

3Exit Cabin select mode Press the [FNC] button.

⁄

•You can compensate the distances in more details by using <DTA> (page 19) function.

In addition, the value specified at <DTA> can be called by selecting “User”.

Function of DPX503

DTA (Digital Time Alignment) setting

Adjusting fine tuning of the speaker position compensation value specified at <Cabin selection> (page 19).

1Enter DTA setting modeSelect “SOUND” > “S-SET” > “DTA”.

For how to select Function Control item, refer to <Function Control> (page 6).

2Select the speaker you want to set

Setting speaker	Display
Front speaker	“DTA-Front”
Rear speaker	“DTA-Rear"
Subwoofer	“DTA-Sub"

Turn the Control knob and push the center when the desired item is displayed.

3Set the compensation value of the speaker positionTurn the Control knob.

Adjust between 0 and 14.44 feet.

Refer to <Appendix> (page 30) on how to set the compensation value.

4Exit DTA setting mode Press the [FNC] button.

English 19