Kenwood DPX503 Range, Range, Range, Display, Display, X’Over setting, 3Set the value, Equalizer Control, Compensation seat, Turn the Control knob, Preset position selection

Audio Adjustments

Function of DPX503

X’Over setting

You can set a X’Over value for the speakers;

Adjustment Item	Display	Range
Front High Pass Filter	“HPF-Front”	Through/40/60/80/100/120/
		150/180/220 Hz
Rear High Pass Filter	“HPF-Rear”	Through/40/60/80/100/120/
		150/180/220 Hz
Low Pass Filter	“LPF”	50/60/80/100/120/Through
		Hz
Subwoofer level	“SUB-W LEVEL”	–15 — +15
Subwoofer Phase	“SW PHASE”	Reverse (180°)/ Normal (0°)

1Enter X’Over setting modeSelect “SOUND” > “S-SET” > “XOVER”.

For how to select Function Control item, refer to <Function Control> (page 6).

2Select the item you want to set

Turn the Control knob and push the center when the desired item is displayed.

3Set the X’Over value Turn the Control knob.

4Exit X’Over setting mode Press the [FNC] button.

Function of DPX503

Equalizer Control

You can adjust following Equalizer Control items ;

Adjustment Item	Display	Range
System Q	“Preset EQ”	“NATURAL” (Natural)/“USER”
		(User setting)/“ROCK” (Rock)/
		“POPS” (Pops)/“EASY” (Easy)/
		“TOP40” (Top 40)/“JAZZ”
		(Jazz)/ ”GAME” (Game)
Bass level*	“Bass”	–8 — +8
Middle level*	“Middle”	–8 — +8
Treble level*	“Treble”	–8 — +8

*Source tone memory: Puts the set up value in the memory per source.

⁄

•“USER”: The ranges selected lastly for Bass level, Middle level, and Treble level are recalled automatically.

1 Enter Equalizer Control mode Select “SOUND” > “S-CTRL” > “EQ”.

For how to select Function Control item, refer to <Function Control> (page 6).

20 DPX503/DPX303

2Select the item you want to set Turn the Control knob.3Set the value

Turn the Control knob.

4Exit Equalizer Control mode Press the [FNC] button.

Function of DPX503

Preset position selection

According to the listening position, select the position from the following settings so that the normal position of the sound environment can be compensated in accordance with the selected position;

Compensation seat	Range
Not compensating.	“All”
Front-Left seat	“FrontLeft”
Front-Right seat	“FrontRight”
Front seat	“FrontAll”
Calls the value adjusted at <Manual position	“USER”
setting> (page 21).

1Enter Position setting mode

Select “SOUND” > “S-CTRL” > “POSIT” > “P-POSI”. For how to select Function Control item, refer to <Function Control> (page 6).

2Select the seat you want to compensate Turn the Control knob.

3Exit Position setting mode Press the [FNC] button.