Kenwood DPX503 Item, Setting overview, Audio Preset Memory, 1Setup Sound Control, Manual position setting, Enter Position setting mode, 1Enter Position setting mode

Function of DPX503

Manual position setting

Making fine adjustment of the value specified at Preset position selection per speaker.

1Enter Position setting mode

Select “SOUND” > “S-CTRL” > “POSIT” > “M-POSI”.

For how to select Function Control item, refer to <Function Control> (page 6).

2Select the speaker you want to adjust

Item	Setting overview
“Front Lch”	Front Left speaker
“Front Rch”	Front Right speaker
“Rear Lch”	Rear Left speaker
“Rear Rch”	Rear Right speaker
“Sub Lch”	Subwoofer Left
“Sub Rch”	Subwoofer Right

Turn the Control knob and push the center when the desired item is displayed.

3Adjust the speaker Turn the Control knob. Adjust between 0 and 5.58 feet.

4Exit Position setting mode Press the [FNC] button.

⁄

•When you select “USER” at <Preset position selection> (page 20), the adjusted setting value will be recalled.

Function of DPX503

Audio Preset Memory

Registering the value setup by Sound Control. The memory cannot be erased by the Reset button.

1Setup Sound Control

Refer to the following operations to setup the Sound Control.

-Cabin selection (page 19)

-DTA (Digital Time Alignment) setting (page 19)

-X’Over setting (page 20)

-Equalizer Control (page 20)

-Preset position selection (page 20)

-Manual position setting (page 21)

2Enter Audio Preset Memory mode Select “SOUND” > “PRESET” > “MEMO”.

For how to select Function Control item, refer to <Function Control> (page 6).

3Put the Audio Preset in the memory Press the Control knob.

“Memory?” is displayed.

4Turn the Control knob to select “YES”, and then press the Control knob.

“Memory Completed” is displayed.

5Exit Audio Preset mode Press the [FNC] button.

⁄

•Register 1 pair of Audio Preset Memory. You cannot register by the source.

•When you press the Reset, all the sources will be the setting value which is registered.

English 21