Chapter 2: Various Setups
Chapter 2: Various Setups
This chapter describes the setup operations of the player according to the connected components. Most of the operations described below can be performed using the provided joystick remote control unit. For the operations, also refer to the separate "User's Guide".
Preparation of Remote Control Unit
Installing the batteries:Open the cover and insert the batteries (R6/AA) by observing the polarity marking.
| 2 |
| 1 |
\ | \ |
6m
30° 30°
@If the joystick remote is used
outside this area, correct operations will not be possible.
¶When the controllable distance of the joystick remote reduces, replace both batteries with new ones.
Turning Power on
When the power plug of the player is inserted in a wall outlet and the POWER button is pressed, the "STANDBY" indicator lights up to indicate that the power of the player is in standby mode.
1.Turn on the connected components and set the am- plifier for the DVD player input.
2. Press | POWER |
on the joystick remote to turn the |
player main unit on.
¶When the "STANDBY" indicator is lit, the power of the player main unit cannot be turned on by pressing the POWER button on the main unit. (To turn the power of the player main unit on it, press the 3button.)
3.The player's tray starts rotation to detect if any disc is inserted, and the display shows "MECHA INIT" (Mechanism Initialization).
4.When no disc is inserted, the display shows "NO DISC" and the player enters stop mode.
¶If there is any disc inserted in the tray at the moment the power is turned ON, playback of the disc starts automatically. If you want to perform setups, press the 7 STOP button on the joystick remote or the 7button on the player main unit to stop the player. The setup operations are not available while a disc is being played.
While the "STANDBY" indicator of the unit is lit, a small amount of current is flowing into the unit’s internal circuitry to back up the memory. This condition is referred to as the standby mode of the unit. While the unit is in the standby mode, it can be turned on from the remote control unit.
[When you are going to leave the listening room]
When the power is on or standby, it can be turned off by pressing the POWER button on the player main unit. (The "STANDBY" indicator does not lit in this status.)
14