Settings
During DVD or VCD search at the first speed step, this setting makes it possible to select whether the reproduced audio is output or not.
At the factory, the player has been set to "On" for outputting the reproduced audio during search.
Setting items
"
" : Select to return to the previous screen.
"On" : Select to output audio during search.
"Off" : Select to mute audio during search.
Operation procedure
1.Set the mode switch of the joystick remote to the Purple position.
2. While the player is in stop mode, press 
and tilt the joystick up or down to display the "SOUND" menu of "SET UP MENU".
3.Press ENTER to open the setup screen.
4.In the setup menu, select "Audio During Search" by tilting the joystick up or down and press ENTER .
Digital Audio | 7 |
PCM Down Conversion | 7 On |
Dolby Digital | 7 Off |
DTS |
|
MPEG |
|
|
|
Speaker Setting |
|
Audio During Search |
|
Dynamic Range Control |
|
|
|
Audio Filter |
|
5.Select "On" or "Off" by tilting the joystick up or down, then press ENTER to enter the selection in memory.
Chapter 2: Various Setups
"Dynamic Range Control" SettingWhen playing a DVD recorded with Dolby Digital Surround, set the dynamic range control according to the software being played. For instance, when the words are hard to be listened to due to effects sound in a move, this setting makes it possible to adjust the volume level of only the
At the factory, the player has been set to "Wide" with which the audio levels recorded in discs are reproduced as they are.
Setting items
"
" : Select to return to the previous screen.
"Wide" : Select to reproduced the audio at the level recorded in the disc.
"Normal" : Select to reduce the difference between the maximum and minimum volume levels.
"Midnight" : Select to further reduce the difference between the maximum and minimum volume levels. This setting is suitable for
32