Settings
"NTSC = PAL" Setting
(Except for the U.S.A. and Canada)
This setting makes it possible to play an
Setting items
"
" : Select to return to the previous screen.
"On" : Select to enable conversion from NTSC to PAL.
"Off" : Select to disable conversion from NTSC to PAL.
Operation procedure
1.Set the mode switch of the joystick remote to the Purple position.
2. While the player is in stop mode, press 
and tilt the joystick up or down to display the "VISUAL" menu of "SET UP MENU".
3.Press ENTER to open the setup screen.
4.In the setup menu, select "NTSC =PAL" by tilting the joystick up or down and press ENTER .
Player Menu Language | 7 |
Disc Menu Language | 7 On |
Audio Language | 7 Off |
Subtitle Language |
|
|
|
Still Mode |
|
FL Mode |
|
NTSC =PAL |
|
SCART Output Select |
|
5.Select "On" or "Off" by tilting the joystick up or down, then press ENTER to enter the selection in memory.
Chapter 2: Various Setups
"SCART Output Select" Setting
(For Europe and U.K.)
This setting makes it possible to select the output signals from the TV SCART connector of the player. (The VCR SCART connector always outputs composite video signals so its output signals cannot be selected.)
When the "RGB" output signals are selected with this setting, the COMPONENT VIDEO OUTPUT jacks of the player do not output any video signal.
At the factory, the TV SCART connector output signals of the player has been set to "Composite".
Setting items
"
" : Select to return to the previous screen.
"Composite" : Select to output composite video signal.
"S Video" : Select to output S Video signals.
"RGB" : Select to output RGB signals.
38