[Surround speakers setting]
Speaker Setting
LS |
|
| Exit |
|
|
|
|
Size | Large | Normal | Off |
Level
Delay Time | 0 | 5.3 | 10.6 | 15.9 | ms |
C
0 dB
| L |
| 0 ms | R |
|
|
| ||
| 0 dB |
|
|
|
| SW |
|
|
|
LS | 0 dB | 0 ms | 0 | RS |
| dB |
Size: Select "Normal" when the connected speaker is incapable of reproducing audio below 100 Hz. Select "Large" when the connected speaker can reproduce audio below 100 Hz.
Use of surround speaker: Select "Off" if the surround speaker is not used.
Level: Set the volume level.
Delay Time: Set the delay time. For the setting value, see "Delay Time Setting".
After completing the speaker setting, select "Exit" to enter the setting and return to the screen in step 5.
[Subwoofer setting]
Speaker Setting
SW |
|
|
|
|
|
|
|
|
|
| Exit |
| ||||
Size |
| On |
|
|
|
| ||||||||||
|
|
|
| Off |
| |||||||||||
Level |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| dB |
0 | +1 | +2 | +3 | +4 | +5 | +6 | ||||||||||
C
0 dB
| L |
| 0 ms | R |
|
|
| ||
| 0 dB |
|
|
|
| SW |
|
|
|
LS | 0 dB | 0 ms | 0 | RS |
| dB |
Use of subwoofer: Select "Off" if the subwoofer is not used.
Level: Set the volume level.
After completing the speaker setting, select "Exit" to enter the setting and return to the screen in step 5.
Chapter 2: Various Setups
7.After completing the speaker settings, select "Test" by tilting the joystick up/down or to the left/right and press ENTER . The cursor will automatically move across the speakers in sequence from "L" and the test tone is output from each speaker indicated by the cursor.
Press ENTER again to display the speaker setting screen for the speaker being indicated by the cursor.
¶The cursor skips the subwoofer and the speakers set to "Off" and test tone is not output from them.
¶After adjusting the level of each speaker channel by tilting the joystick to the left or right, press the ENTER button, then select "Exit" and press the ENTER button to restart the test tone output. Repeat the volume level adjustment until the volumes of all speakers are identical.
¶When the joystick is tilted in any direction during the test tone output, the test tone output stops. (The same effect can also be obtained by pressing the RETURN button)
8.After completing the speaker setting, select "Exit" and press ENTER to enter the setting in memory.
¶As the test tone is not output from the subwoofer, its volume level should be adjusted after listening to the actual sound.
Settings
31