Settings

"DVD VIDEO Mode" Setting

When playing a disc in which DVD VIDEO and DVD AUDIO are mixed, this setting makes it possible to select whether the DVD VIDEO part or DVD AUDIO part is to be played. To reproduce only the DVD VIDEO part, set this item to "On".

At the factory, the player has been set to "Off" with which the DVD AUDIO part is played back.

Setting items

"" : Select to return to the previous screen.

"On" : Select to play only the DVD VIDEO part in a DVD VIDEO/DVD AUDIO mixed disc.

"Off" : Select to pay only the DVD AUDIO part in a DVD VIDEO/DVD AUDIO mixed disc.

Operation procedure

1.Set the mode switch of the joystick remote to the Purple position.

2. While the player is in stop mode, press

1

to

SET UP

display the "MAIN" menu of "SET UP MENU".

3.Press ENTER to open the setup screen.

4.In the setup menu, select "DVD VIDEO Mode" by tilting the joystick up or down and press ENTER .

Rating

7

TV Aspect

7 On

TV Mode

7 Off

TV Monitor Type

 

 

 

DVD VIDEO Mode

 

OSD Position

 

On Screen Message

 

IPB Display

 

5.Select "On" or "Off" by tilting the joystick up or down, then press ENTER to enter the selection in memory.

This setting is reset to default "Off" when the disc is changed or the power is set to off or standby.

Chapter 2: Various Setups

"OSD Position" Setting

When the connected TV is a widescreen TV, the OSD (On-Screen Display) or on-screen messages may be displayed incorrectly or overflow outside the screen depending on the TV screen mode setting. The OSD position switching makes it possible to display the OSD and on-screen messages normally.

At the factory, the player has been set to "Normal".

Setting items

"" : Select to return to the previous screen.

"Normal" : Select to display the OSD and messages on the top of the TV screen. Usually select this setting.

"Cinema" : Select to display the OSD and messages on the lower part of the TV screen. Select this setting when the OSD or messages are deviated outside the TV screen.

22