Unpacking
Unpack the unit carefully and make sure that all accessories and cables are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping compa- ny without delay. Only the consignee (the person or company receiving the unitl can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing materials for use should you trans- port or ship the unit in the future.
Before applying power of AC adaptor
Important!
USA and Canada
Unit shipped to the above are not equipped with an AC voltage selector switch and the discussion of such a switch that follows should be disregarded.
All other countries
AC adaptor shipped to countries other than the above are equipped with an AC voltage selector switch on the top cover. Refer to the following paragraph for the proper set- ting of this switch.
AC voltage selection
AC adaptor operates on 110- 120 volts or
Our warranty does not cover damage caused by excessive line voltage due to improper set- ting of the AC voltage selector switch.
WARNING:
TO PREVENT FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
Move switch lever to match your line voltage with a small screwdriver or other pointed tool.
AC voltage selector switch
Fig. 1
Before plugging in this unit, make sure that the position of the AC Voltage Selector conforms to your line (mains) voltage. If not, it must be reset. See Fig. 1.
WARNING NOTICE:
IN MOST CASES IT IS AN INFRINGEMENT OF COPYRIGHT TO MAKE COPIES OF TAPES OR DISCS WITHOUT THE PER- MISSION OF THE COPYRIGHT OWNERS. ANYONE WISHING TO COpy COMMER-
CIALLY AVAILABLE TAPES OR DISCS SHOULD CONTACT THE MECHANICAL COPYRIGHT PROTECTION SOCIETY LIMITED OR THE PERFORMING RIGHTS SOCIETY LIMITED.
2
