Kenwood DX-7 instruction manual To playback a OAT cassette Basic operation, To playa tape

To playback a OAT cassette (Basic operation)

First load a tape into the unit (see page 141.

Operation is possible with ei!her the main unit or the remote controller.

		•	To playa tape
		•	Press the [PLAY/REPEAT] button.
		•	Tapes recorded in extended play mode
			cannot be played.
			If you attempt to play such a tape, "NO
			PLAY" appears on the display.
		• If the playback position is in the middle of
			a tune when the tape is loaded, the tune
			number for that tune will not be displayed.
			Tune numbers will be displayed from the
			beginning of the next tune.
	~
	11.-' r
	u-CoJ
Tune number	Totaf elapsed
display	time display	•	To stop playback
		•	Press the [STOP/EJECT] button.
		•	To resume playback, press the [PLAY/
			REPEAT] button again.

When finished, remove the tape from the unit and set the [POWER] switch to OFF.

• To pause playback

• Press the [PAUSE] button.

• To resume playback, press the [PAUSE] button again or press the [PLAY/REPEAT] button.

• If five minutes el~pse with the unit in pause mode, the unit automatically enters stop mode.

n,

U~,

DX-7 15