Kenwood DX-7 To erase an unnecessary ST-ID from a recorded tape, Renubmering tunes

•To erase an unnecessary ST-ID from a recorded tape

•If the tune number changes at a place other than between two tunes. an unnecessary ST-10

is written on the tape.

Erase the ST-ID using the following procedure.

	•	The unit	enters	pause	•	The tape automatically
		mode after the unneces-				rewinds to the begin-
		sary ST-ID.		Unnecessary		ning of the unnecessary
						ST-ID.
	~sttune		I ~ndtu::ll		•		con-
						tinues.then playback
						The ST-lOis erased and
	m)			r+-+J(PAUSE)
	/1-'			l.~(R~G)		rl -,ST.ID~. __
Display example		"		"-,,.,.,"
		(Pause)		(Blinks)		(Blinks)
	!...J~I	B: leI		!...J~I	B:le:	LIe	l:;:U:
						pre~ioJstu~enumber

is displayed.

•Renubmering tunes

•After adding or deleting one or more ST-IDs. you should renumber the tunes so that the

tune numbers run consecutively from the first to the last tune starting with "'''.

		Press for at
		least 2 seconds.
• The unit enters record-	•	:rhe tape automatically
standby mode.		rewinds to the begin-
(Record-standby)		ning and then fast-
		forwards to renumber all
Display example
		the tunes.
	•	The tape automatically
		rewinds to the begin-
		ning again and stops.
		(Lights while tunes are
		being renumbered.)

DX-7 25