Kenwood DX-7 Stopping/pausing recording, To pause recording, Erasing a recording

Stopping/pausing recording

•Operation is possible with either the main unit or the remote controller.

•To pause recording

•Press the [PAUSE] button.

If five minutes elapse in pause mode, the rotating head moves away from the tape to protect the tape. (The REC indicator blinks.1

• To stop without recording an END-ID (See page 26)

• Press the [STOP/EJECT] button or press the remote controller's[STOP] button .

• To stop after recording an END-ID (See page 26)

• During recording, press the [FF/CUE] but- ton for at least two seconds. (After the EN D-I D is recorded for nine seconds, the unit enters stop mode.1

•Erasing a recording

•To erase a tape, set the unit to record mode with nothing connected to the [DIGITAL I/O] jack.

•Do not attach the separately sold AID converter unit.

20 DX-7