2Before applying power

Caution : Read this page carefully to ensure safe operation.

Units are designed for operation as follows.

................. AC 110-120 / 220-240 V switchable

Preparation section

AC voltage selection

The AC voltage selector switches on the rear panel are set to the voltage that prevails in the area to which the unit is shipped. Before connecting the power cord to your AC outlet, make sure that the setting positions of these switches match your line voltage. If not, they must be set to your voltage in accordance with the following direction.

AC voltage selector switches

Move switch lever to match your line voltage with a small screwdriver or other pointed tool.

AC 110 -AC 220 -

Note: 120V

240V

Our warranty does not cover damage caused by excessive line voltage due to improper setting of the AC voltage selector switch.

Safety precautions

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

 

 

 

 

 

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

 

 

 

CAUTION

 

 

 

 

 

 

 

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS IN-

 

 

 

RISK OF ELECTRIC SHOCK

 

 

 

 

 

 

 

SIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

 

 

 

DO NOT OPEN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRI-

 

 

 

 

 

ANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED

 

 

 

 

 

"DANGEROUS VOLTAGE" WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF

 

 

 

 

 

SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

 

 

 

 

 

 

 

 

 

 

 

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO

 

 

 

 

 

ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAIN-

 

 

 

 

 

TENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE

 

 

 

 

 

APPLIANCE.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The marking of products using lasers (Except for some areas)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION

 

 

 

 

CLASS 1

 

 

 

 

 

 

 

 

INVISIBLE LASER RADIATION

 

 

 

 

LASER PRODUCT

 

 

 

 

WHEN OPEN. AVOID EXPOSURE

 

 

 

 

 

 

 

 

 

TO BEAM.

 

 

 

 

 

 

 

 

The marking is located on the rear panel and says this

Inside this laser product, a laser diode(s) exceeding Class 1

product has been classified as Class 1. It means that

laser radiation is/are contained as alerted by the internal

there is no danger of hazardous radiation outside the

caution label shown above. To avoid exposure to laser

product

beams, do not open the cover.