Recording on TAPE

27

menu

 

\

 

volume / multi control

set / demo

\

 

3

Select an input source other than "TAPE"

Example:

To select the CD input

CD

6

4

TAPE rec

5

3.Set the recording condition.

Select the reverse mode. ™

÷Check the tape transport direction before starting recording. If it is set to the reverse direction, only one side of tape can be recorded regardless of the reverse mode setting made here.

÷The tape equalizer is defeated during recording.

4.Select the source to be recorded.

CD (CD-DA, VIDEO CD with PBC OFF and MP3 file)[For PBC OFF *]

TUNER (Broadcasts)

AUX (External input) [Adjusting the AUX input level e]

÷If a CD has already been loaded, it starts to play now. Press the 7 STOP key to stop it.

The character information

C D C D - D A display shows the recording input source.

5.Start recording.

1Press the TAPE rec key.

2Play (or tune) the input source to be recorded.

÷Recording stops automatically when the tape side (s) to be recorded have been fully recorded.

section Basic

Pause the recording

TAPE rec

Lights

÷Press the TAPE rec key during recording. It stops after leaving a non-recorded blank of 4 seconds. (Press the key again to resume recording.)

Stop the recording

7

stop

Tuning

Mode

Points in CD recording (CD-DA and VIDEO CD with PBC OFF only)

When recording CD tracks onto a tape, if you leave the cassette deck in record-pause mode be- forehand, the cassette deck recording can be started at the CD starts to be played.

1Put the CD player in pause mode.

2Select the track to be recorded with the skip (4, ¢) keys. (The CD player pauses at the beginning of the selected track.)

3Put the cassette deck in Record-pause mode. (Press TAPE rec key twice)

4Start playing the CD. (Recording starts)

÷ To stop recording, press the 7 STOP key.