28Various CD (CD-DA, VIDEO CD and MP3 file) playback features

Symbols CD-DAVIDEO CDMP3 file in the text indicate the disc media that can be played back.

Listening to the desired sequence (PGM ) CD-DAVIDEO CD (with PBC OFF *)

Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)

A non-finalized CD-R cannot be played back.

Select the CD input.

1Let the "PGM" indicator light.

Press in stop mode

Lights

AUTO//MONO

PGM

P G M C D

2Select track numbers in the order you want to play them.

1Select the track.

1 2 3

4 5 6

Selection of tracks

Program position of the track to be selected next.

7 8 9

P G M C D

10 0

Application section

(Go to step 2 within 4 seconds.)

2Confirm the selection.

SET

(To select more than one track, repeat steps 1and

2for each track.)

Press the numeric keys as shown below....

To select track No. 23

: +10 X 2, 3

To select track No. 40

: +10 X 4, 0

÷A track can also be selected using the 4 or ¢ key.

÷Up to 32 tracks can be programmed. When "FULL" is dis- played, no more tracks can be programmed.

÷If you made a mistake, press the CLEAR key and enter the track No. again.

÷When a track No. is entered, the track will be added to the end of the existing program.

÷When the total time of CD program is 256 minutes or more, the time display shows "- - : - -".

3Start playback.

CD

SELECT

÷Tracks will be played in the order they were pro- grammed (following the program numbers).

÷When the 4/ ¢ key is pressed during play, the pro- gram will jump to the preceding or the following track respectively.