34

Convenient recording methods

Program recording ( CD-DA VIDEO CD (with PBC OFF *) =TAPE)

Desired CD tracks can be programmed in the desired sequence and recorded onto a tape.

The tape deck of the unit can record signals only on Normal (Type ) and High (Type ) tapes. It cannot record on Metal (Type ) tapes.

Be sure to put the cassette deck in stop mode.

1Make preparation for recording.

1Select the CD input.

2Ensure that the "RANDOM" indicators are not lit.

3Perform steps 1 to 3 of the procedure in "Recording on TAPE". §

4Insert disc in the CD player.

÷If the "RANDOM" indicator is lit, turn it off by pressing the RANDOM key to cancel the random play mode.

2Program the desired sequence of CD tracks.

Perform steps 1 and 2 of the procedure in "Listening to the desired sequence (Pro- gram playback)". •

÷When the PGM key is pressed to cancel the ed- ited contents, the entire editing contents will be erased. ª

÷Tracks programmed beyond the available tape recording time will be interrupted in the middle.

Application section

3Start recording.

TAPE O.T.E.

If you are operating the remote, the same effect as step 3can be obtained by simply pressing the

O.T.E. key to start recording.

÷Recording starts from the first track in the pro- gram and ends after having recorded the entire programmed tracks.

÷Recording stops automatically when the program playback of CD has completed.

÷When either playback or recording stops, the other op- eration is stopped automatically.

To interrupt a recording

7

stop

Tuning

Mode

At the end of the recording

Cassette deck : Stop is executed after an unrecorded portion of about 4 sec. has been produced.

(Recording and playback will be stopped)