Installation

Installation the Hands-Free Box

•Determine the installation position after making sure that the unit can communicate with the cell-phone.

•Please do not install the unit near the dashboard, the rear tray, or other important components. Doing so could lead to injury or accident should the unit come off due to a shock and strike a person or an important component. Tapping screws should be used for mounting. (Attachment with velcro strips, although easy, can come off with a shock.)

Securing to audio board

Accessory 2 (Ø4 × 16 mm)

Antenna part

Securing to pile carpet

Antenna part

Accessory 3

•Do not stick the velcro tape over the serial number.

•If the installation place is stepped, cut the velcro tape into two pieces and stick them at two positions as shown.

Installation the Microphone Unit

1Check the installation position of the microphone (accessory 1).

2Remove oil and other dirt from the installation surface.

3Install the microphone.

4Wire the microphone cable up to the hands-free box with it secured at several positions using tape or the like.

Fix a cable with a commercial item of tape.

Peel the release coated paper of double-face adhesive tape to fix on the place shown in the left-hand example.

Adjust the direction of the microphone to the driver.

20 English