Kenwood KCA-BT100 Knob, Display, Operation, 5Make a call, Search method, Knob Operation, 4Select the name, 1Enter the Phone Book mode, Dialing by Using the Phone Book

Dialing Method (For Audio receiver)

Registering to the Preset Dial Number List

You can register up to 3 phone numbers for quick dialing.

1Enter the phone number you wish to register Enter the phone number with reference to the following:

-<Making a Call by Entering a Phone Number> (page 7)

-<Dialing by Using the Phone Book> (page 8)

-<Dialing by Using the Outgoing Call List> (page 8)

-<Dialing by Using the Incoming Call List> (page 9)

2Select the button you wish to register

Press the [1] – [3] button for at least 2 seconds. For the Audio receiver with Multi-function Key System:

1 Press the [NEXT] button. Select the key function section.

2 Press the [1] ("1"/ "MEM.1") – [3] ("3"/ "MEM.3") button for at least 2 seconds.

"Memory" or "MEMORY" display blinks 1 time.

3Exit the dialing method selection mode Press the [ATT] button for at least 1 second.

Dialing by Using the Phone Book

You can dial by using the downloaded Phone Book.

1Enter the Phone Book mode

Select the "INITIAL", "PH-BOOK1", "PH.BOOK", or "PH- BOOK2" display.

Refer to <Selecting the Dialing Mode> (page 7). If you have selected, "PH.BOOK" or "PH-BOOK2", proceed to step 4.

For the Audio receiver with Multi-function Key System: Press the [2] ("PHBK") button.

Pressing this button toggles between the following search methods:

Display	Search method
"INITIAL"/	Search by the initial.
"PH-BOOK1"
"PH.BOOK"/	Search in the alphabetical order.
"PH-BOOK2"	Proceed to step 4.

2Select the initial to be searched forPush the Control knob towards [4], [¢], [FM] or [AM].

Move the cursor to the initial to be searched for.

Knob Operation

[4]/ [¢]	Move to the next character.
[FM]/ [AM]	Move to the next row.

3Determine the selected initial

Press the Control knob ([38]) for at least 1 second.

4Select the namePush the Control knob towards [FM], [AM], [4] or [¢].

Select the name.

5Make a call

Press the Control knob ([38]) for at least 1 second.

"CALL" or "Call" is displayed.

•To use the Phone Book, it must have been downloaded from the cell-phone. For details, see <Downloading the Phone Book> (page 5).

•Initials including no corresponding name will not be displayed.

•On the control unit that displays three rows, the name in the middle row is the selected one.

•During search, a non-accent character such as "u" is searched for instead of an accent character such as "ü".

•Characters that the control unit cannot display are searched for in the order in which they were registered to the Phone Book.

Dialing by Using the Outgoing Call List

You can dial by using the outgoing call list. Up to ten phone numbers of the originated calls are recorded in the outgoing call list.

1Enter the outgoing call list mode Select the "OUT" or "OUT-CALL" display.

Refer to <Selecting the Dialing Mode> (page 7).

8 English