2Select a name or phone numberPush the Control knob towards [FM] or [AM].

3Make a call

Press the Control knob ([38]) for at least 1 second.

"CALL" or "Call" is displayed.

•The outgoing call list is the list of calls originated from this unit. It is not the one stored in the cell-phone memory.

•On the control unit that displays three rows, the phone number in the middle row is the selected one.

•Depending on the type of your control unit, "0" is displayed for the tenth call in the outgoing call list.

Dialing by Using the Incoming Call List

You can dial by using the incoming call list. Up to ten phone numbers of the received calls are stored recorded in the incoming call list.

1Enter the incoming call list mode Select the "IN" or "IN-CALL" display.

Refer to <Selecting the Dialing Mode> (page 7).

2Select a name or phone number

Push the Control knob towards [FM] or [AM].

3Make a call

Press the Control knob ([38]) for at least 1 second.

"CALL" or "Call" is displayed.

•The incoming call list is the list of calls received at this unit. It is not the one stored in the cell-phone memory.

•On the control unit that displays three rows, the phone number in the middle row is the selected one.

•Depending on the type of your control unit, "0" is displayed for the tenth call in the incoming call list.

Remote Control (For Audio receiver)

Functions of the buttons[SRC] button*

During a call: End the call.

[VOL] buttons*

During a call: Adjusts the voice volume.

[] button

Enters the dialing method selection mode. When a call comes in: Answers the call.

[38] button* During a call:

Switches between the private talk mode and the hands-free talk mode.

In dialing method selection mode: Selects a dialing method.

[¢] button*

Number dial input: Inputs "+".

[4] button* Number dial input:

Clears the entered phone number.

[FM] button*

Number dial input: Inputs "#".

[AM] button*

Number dial input: Inputs "*".

[0] – [9] buttons*

Number dial input: Inputs a digit.

[DIRECT] button*

Makes a call.

Remote Control Mode selector switch

Switch to "AUD" when dialing.

•* If your remote controller has a mode selection switch, set it to "AUD".

•Remote controllers with the [ ] button and/or numeric buttons are available optionally. Purchase a remote

controller with a desired function.

English 9