Troubleshooting Guide

What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems.

?The hands-free talk volume is low.

✔The hands-free talk volume is set at a low level.

☞The hands-free talk volume can be adjusted independently. Adjust it during hands-free talk.

?No sound is heard from the rear speakers.

✔You are talking in the hand-free talk mode.

☞No sound is heard from the rear speakers in the hands-free talk mode.

?No beep is heard at reception of an incoming call.

✔No beep is heard depending on the type of your cell-phone.

☞Selecting "Call Beep: ON" or "C-BP ON" (page 11), or "Beep On" (page 16) allows you to hear the beep.

?Characters in a name are missing.

✔The control unit cannot display accent characters.

☞Set the display character conversion function switch to "2" (page 18).

?The name of the cell-phone is not displayed.

✔When registering a cell-phone, the address may be displayed instead of the name of the cell-phone.

☞Turn off the power of the control unit and on again. The name of the connected cell-phone will be displayed.

The messages shown below display your systems condition.

No Number/ NO-NMBER/ Incoming No Number :

•The calling party does not notify a caller ID.

•There is no phone number data.

No Data/ NO DATA :

•There is no outgoing call list.

•There is no incoming call list.

No Entry/ NO ENTRY :

The cell-phone has not been registered (pairing).

Disconnect/ DISCONCT/ Non Connection/ Disconnected : The unit cannot communicate with the cell-phone.

Connect/ CONNECT :

The unit can communicate with the cell-phone.

HF Error 07/ HF ERR07:

The memory cannot be accessed.

\Turn off the power and on again. If this message still appears, press the reset button on the control unit.

HF Error 68/ HF ERR68:

The unit cannot communicate with the cell-phone.

\Turn off the power and on again. If this message still appears, press the reset button on the control unit.

Specifications

Specifications subject to change without notice.

Bluetooth section

 

 

General

Technology

 

 

Operating voltage (11 – 16V allowable)

: Bluetooth 1.2 Certified

 

 

: 14.4 V

Frequency

 

 

Current consumption

: 2.402 – 2.480 GHz

 

 

: 0.2 A

Output Power

 

 

Dimension (W × H × D)

: +4dBm (MAX), 0dBm (AVE) Power Class 2

 

 

: 95 × 30 × 105 mm

 

 

 

3-3/4 × 1-3/16 × 4-1/8 inch

 

 

 

Weight

 

 

 

: 0.78 lbs (0.35 kg)

 

 

 

 

English 21