Operation of hands-free phoning

Before Use

•For details on the Bluetooth cell-phone with the hands-free function, see <About the Cell-Phone> (page 33).

•You need to register your cell-phone before using it with this unit. For more details, see <Registering Bluetooth device> (page 25).

•If you have registered two or more cell-phones, you need to select one of them. For more details, see <Selecting the Bluetooth device You Wish to Connect> (page 27).

•To use the Phone Book, it must be downloaded to this unit in advance. For details, see <Downloading the Phone Book> (page 26).

•“BT” indicator is lit when a cell-phone is connected to this unit.

Receiving a callAnswering a Phone CallPress the [AUD] knob.

⁄

•The following operations disconnect the line:

-Insert a CD.

-Connect a USB device.

•The name of the calling party is displayed if it has already been registered in the Phone Book.

Rejecting an Incoming CallPress the [ATT] button for at least 1 second.
Call waitingAnswering Another Incoming Call with the Current Call Suspended1Press the [AUD] knob.

2Turn the Control knob or push it towards up or down. Select the “Answer” display.

3Press the [AUD] knob.Answering another Incoming Call after Terminating the Current CallPress the [SRC] button.Continuing the Current Call

1Press the [AUD] knob.

2Turn the Control knob or push it towards up or down. Select the “Reject” display.

3Press the [AUD] knob.

Answering the Waiting Call after Terminating the Current Call

Press the [ATT] button for at least 1 second.

Switching between the Current Call and Waiting Call

Press the [AUD] knob.

Each pressing of this knob switches the calling party.

During a callDisconnecting a Call

Press the [SRC] button.

Switching to the Private Mode

Press the Control knob.

Switches between Private talk (“PRVT”) and Hands- free talk each time this knob is pressed.

⁄

•Depending on the type of your cell-phone, switching to the private talk mode may select the source that was used before commencing the hands-free connection. If this happens, the source cannot be switched back to the hands-free talk mode by operating this unit. Operate your cell-phone to return to the hands-free talk mode.

Adjusting the Voice Volume during a CallTurn the [AUD] knob.

16 KDC-BT8041U/ KDC-BT8141U

Other functions

Clearing the Disconnection Message Press the [ATT] button for at least 1 second.

“HF Disconnect” disappears.

Switching between Display Modes Press the [TI] button.

The number of items displayed is switched between 1 or 3 each time this knob is pressed.