Bluetooth Setup
Registering PIN CodeBy operating the Bluetooth device, specify the PIN code necessary for registering this unit.
1Select PIN code edit item during Menu mode (In Standby mode)“PIN Code Edit” is displayed.
For how to select Function Control items, refer to <Function Control> (page 6).
2Enter PIN code edit modePress the Control knob for at least 1 second. The current setting of PIN code is displayed.
3Input the PIN codeOperation type |
| Operation |
Select the numbers. |
| Turn the Control knob or push it towards |
|
| up or down. |
Move to the next digit. |
| Push the Control knob towards right. |
Delete the last digit. |
| Push the Control knob towards left. |
Press the Control knob for at least 1 second. If “Completed” is displayed, registration is completed.
5Exit the PIN code edit mode Press the [FNC] button.⁄
•By default, "0000" is specified.
•A PIN code can be specified with up to eight digits.
Download the phone book data from the cell- phone to this unit so that you can use the Phone Book of this unit.
To download automaticallyIf the
⁄
•Setting on the
•If no phone book data is found in the unit even after the compete display, your
By operating the
•During downloading: “Downloading” is displayed.
•After completion of downloading: “Completed” is displayed.
3By operating the⁄
•Up to 1000 phone numbers can be registered for each registered
•Up to 32 digits can be registered for each phone number along with up to 50* characters representing a name.
(* 50: Number of alphabetic alphabetical characters. Fewer characters can be input depending on the type of characters.)
•To cancel downloading of the phone book data, operate the
26