Bluetooth Setup

Registering Bluetooth device

To make your Bluetooth device (cell-phone or audio player) usable with this unit, you need to register it (pairing). You can register up to five Bluetooth devices to this unit.

When registering from Bluetooth devices1Turn on the control unit.2Start registering a unit by operating the Bluetooth device

By operating the Bluetooth device, register the hands-free unit or audio player (pairing). Select “KENWOOD BT CD/R-2P2” from the list of connected units.

3Enter a PIN codeInput the PIN code registered as mentioned in <Registering PIN Code> (page 26).

Check that registration is complete on the Bluetooth device.

4By operating the Bluetooth device, start hands- free or audio connection.When registering from this unit

1Select Bluetooth device registration item during Menu mode (In Standby mode) “Device Regist” is displayed.

For how to select Function Control items, refer to <Function Control> (page 6).

2Enter Bluetooth device registration mode Press the Control knob for at least 1 second. Search for the Bluetooth device.

When search is completed, “Finished” is displayed.

3Select the Bluetooth device

Turn the Control knob or push it towards up or down to select the Bluetooth device.

Press the Control knob to determine the selection.4Input the PIN code

Operation type

 

Operation

Select the numbers.

 

Turn the Control knob or push it towards

 

 

up or down.

Move to the next digit.

 

Push the Control knob towards right.

Delete the last digit.

 

Push the Control knob towards left.

5Transmit the PIN code

Press the Control knob for at least 1 second. If “Pairing Success” is displayed, registration is

completed.

6Return to the device list Press the Control knob.7Exit Bluetooth device registration Press the [FNC] button.

This unit allows up to eight digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input from the Bluetooth device.

If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device.

If the error message appears even though the PIN code is correct, try <Registering Special Bluetooth device> (page 25).

Registering Special Bluetooth device

Allow registration of a special device that cannot be registered normally (pairing).

1Select special device registration item during Menu mode (In Standby mode)

“SPCL DVC Select” is displayed.

For how to select Function Control items, refer to <Function Control> (page 6).

2Enter special device registration mode Press the Control knob for at least 1 second. A list is displayed.

3Select a device nameTurn the Control knob or push it towards up or down to select a device name.

Press the Control knob to determine the selection.

If “Completed” is displayed, registration is completed.

4Go through the procedure of <Registering Bluetooth device> (page 25) and complete the registration (pairing).

Cancelling special device registration mode Press the [FNC] button.

• If the device name is not in the list, select “Other Phone”.

English 25