* Displayed only when a category (type) for which a voice tag has been registered is selected.
5 Register the category (type) by performing steps 4 to 6 in <Adding a voice dialing command> (page 28).
Exit the voice tag mode Press the [FNC] button.
⁄
• Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phonebook may not be recalled by voice command.
Display
“T-REG”
“T-CHK”*
“T-DEL”*
“ ”
Operation
Register a voice tag.
Play a voice tag.
Delete a voice tag.
Return to step 2.
Turn the Control knob or push it towards up or down.
“General”/ “Home”/ “Office”/ “Mobile”/ “Other”
3 Press the Control knob.
4 Select a mode
Push the Control knob towards right or left.
Select the category (type) you wish to set
2
Enter voice tag mode
Select “BT” > “VOICE” > “TYPE”.
For how to select Function Control item, refer to <Function Control> (page 6).
1
Select “DEL” (Delete)
4 Delete a voice tag Press the Control knob.
Turn the Control knob to select “YES”, and then press the Control knob.
Return to step 2.
Exit the voice tag mode Press the [FNC] button.
⁄
• Audio sound is not output during voice tag registration.
Setting a Voice Command for Category
Add a voice tag to the phone number category (type) for voice calling.

Bluetooth Setup

Adding a voice dialing command

Add a voice tag to the phonebook for voice dialing. You can register up to 35 voice tags.

1Enter voice tag modeSelect “BT” > “VOICE” > “NAME”.

For how to select Function Control item, refer to <Function Control> (page 6).

2Search for the name to register

Select the name to register with reference to 4 in <Calling a number in the PhoneBook> (page 17). If a voice tag has already been registered for a name, “*” is displayed before the name.

3Select a modePush the Control knob towards right or left.

Display

“N-REG”

“N-CHK”*

“N-DEL”*

“”

Operation

Register a voice tag.

Play a voice tag.

Delete a voice tag.

Return to step 2.

*Displayed only when a name for which a voice tag has been registered is selected.

Select “REG” (Regist)

4Register a voice tag (first) Press the Control knob. “Enter Voice 1” is displayed.

When a beep is heard, utter a voice tag within 2 seconds.

5Confirm the voice tag (second) Press the Control knob.

“Enter Voice 2” is displayed.

When a beep is heard, utter the same voice tag as that you uttered in step 4 within 2 seconds. “Completed” is displayed.

6End registration

Press the Control knob.

Return to step 2. You can register another voice tag continuously.

⁄

•If your voice cannot be recognized, a message is displayed. Pressing the Control knob allows you to retry voice input. (page 42)

Select “CHK” (Play)4Press the Control knob.

Play the registered voice and return to step 2.

28 KDC-BT8041U/ KDC-BT8141U