Audio Adjustments
Audio ControlYou can adjust following Audio Control items ;
Adjustment Item |
| Display |
| Range |
Rear volume |
| “REAR VOLUME” |
| 0 — 35 |
Subwoofer level |
|
| ||
System Q |
| “USER”/“ROCK”/ |
| User setting/Rock/Pops/Easy/ |
|
| “POPS”/“EASY”/ |
| Top 40/Jazz/Natural |
|
| “TOP40”/“JAZZ”/ |
|
|
|
| “NATURAL” |
|
|
Bass level* |
| “BASS LEVEL” |
| |
Middle level* |
| “MIDDLE LEVEL” |
| |
Treble level* |
| “TREBLE LEVEL” |
| |
Balance |
| “BALANCE” |
| Left 15 — Right 15 |
Fader |
| “FADER” |
| Rear 15 — Front 15 |
Exit Audio Control mode (Volume control mode)
*You can adjust these items in detail. Refer to <Adjusting the detail of Audio Control> (Page 22).
*Source tone memory: Puts the set up value in the memory per source. (Detail Audio item is included)
⁄
•“USER”: The ranges selected lastly for Bass level, Middle level, and Treble level are recalled automatically.
1 Select the source to adjustFor how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4).
2Enter Audio Control mode Press the [AUD] knob.3Select the Audio item to adjust Press the [AUD] knob.4Adjust the Audio item Turn the [AUD] knob.5Exit Audio Control mode Press any button.Press a button other than the [AUD] knob or [0] and [ATT] button.
Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail.
Bass levelAdjustment Item |
| Display |
| Range | |
Bass Center Frequency |
| “BASS FRQ” | 40/50/60/70/80/100/ | ||
|
|
|
|
| 120/150 Hz |
Bass Q Factor |
| “BASS Q FACTOR” | 1.00/1.25/1.50/2.00 | ||
Bass Extend |
| “BASS EXT” |
| OFF/ON | |
| Middle level |
|
|
|
|
|
|
|
|
|
|
|
Adjustment Item |
| Display |
| Range | |
Middle Center Frequency |
| “MIDDLE FRQ” |
| 0.5/1.0/1.5/2.0 kHz | |
Middle Q Factor |
| “MIDDLE Q FACTOR” | 1.00/2.00 | ||
| Treble level |
|
|
|
|
|
|
|
|
|
| |
Adjustment Item |
| Display |
| Range | |
Treble Center Frequency |
| “TREBLE FRQ” | 10.0/12.5/15.0/17.5 kHz | ||
Select the desired item to be set in detail from followings;
•Bass level
•Middle level
•Treble level
For how to select Basic Audio items, see <Audio Control> (page 22).
2Enter Detail adjustment mode of Audio ControlPress the [AUD] knob for at least 1 second.3Select the Detail Audio item to adjust Press the [AUD] knob.4Adjust the Detail Audio item Turn the [AUD] knob.5Exit the Detail Audio Control modePress the [AUD] knob for at least 1 second.
⁄
•When you set the Bass Extend to ON, low frequency response is extended by 20%.
•You can exit the Audio Control mode at anytime by pressing any button except for [AUD] knob, [0] and [ATT] button.
22