Manuals / Brands / Home Audio / CD Player / Kenwood / Home Audio / CD Player

Kenwood KDC-BT8041U, KDC-BT8141U Range, Display, Display, Audio Setup, Speaker type, 1Enter Standby, Speaker Setting, 5Exit Audio Setup mode, 2Enter Audio Setup mode

1 48

Download 48 pages, 870.43 Kb

Audio Setup

You can set Sound system , such as follows;

Adjustment Item		Display		Range
Front High Pass Filter		“HPF-F”		Through/40/ 60/80/100/120
				/150/180/220 Hz
Rear High Pass Filter		“HPF-R”		Through/40/ 60/80/100/120
				/150/180/220 Hz
Low Pass Filter		“LPF”		50/60/80/100/120/Through
				Hz
Subwoofer Phase		“SW PHASE”		Reverse (180°)/ Normal (0°)
Volume offset		“VOL-OFFSET”		–8 — ±0 (AUX: -8— +8)
Loudness		“LOUD”		OFF/ON
Dual Zone System		“2 ZONE”		OFF/ON

⁄

•Volume offset: Sets each source’s volume as a difference from the basic volume.

•Loudness: Compensates for low and high tones during low volume. (Only the low tone is compensated for when the tuner is selected as a source.)

•Dual Zone System

Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.

-Set up the channel of sub source by “Zone2” of <Function Control> (page 6).

-Select Main source by [SRC] button.

-Adjust the volume of Front channel by [AUD] knob.

-Adjust the volume of Rear channel by <Audio Control> (page 22) or [5]/[∞] button on the remote control

(page 30).

-The Audio Control has no effect on sub source.

1 Select the source to adjust

For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4).

2Enter Audio Setup mode

Press the [AUD] knob for at least 1 second.

3Select the Audio Setup item to adjust Press the [AUD] knob.4Adjust the Audio setup item Turn the [AUD] knob.5Exit Audio Setup mode

Press the [AUD] knob for at least 1 second.

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type as follows;

Speaker type			Display
OFF			“OFF”
For 5	& 4 in. speaker		“5/4inch”
For 6	& 6x9 in. speaker		“6x9/6inch”
For the OEM speaker			“O.E.M.”

1Enter Standby

Select the “STANDBY” display.

For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4).

2Enter Speaker Setting mode Press the [AUD] knob.

“SP SEL” is displayed.

3Select the Speaker type Turn the [AUD] knob.4Exit Speaker Setting mode Press the [AUD] knob.

English 23

Contents

Page Basic Operations of remote control Accessories/ Installation Procedure 2WARNING To prevent injury or fire, take the following precautions: Before using this unit for the first time How to reset your unit Cleaning the Unit [SRC] Release [ATT] Disc slot [TI] [ ] [FNC] Subwoofer output Control knob Function Control [FNC] Category Function of setup item Text/Title scroll Control knob Item Setting Entry Setting overview Entry Setting overview Next page Enter Function Control mode Press the [FNC] button 2Select your desired setup item Operation type Operation 3Make a setting Disc Naming (DNPS) 1Play the disc you want to attach a name to 2Select Name set mode item during Menu mode 3Enter Name set mode Press the Control knob for at least 1 second About Display Type Display Text Display Selection In Tuner source Information In Auxiliary input source In Bluetooth audio source 1Enter Text Display Selection mode (In Display Type A/ B/ C/ D/ F) Select “DISP” > “TEXT” 2Select the text display part (Display Type A/ B/ C/ D only) Music Select 2Search for music Select the category item using the Control knob iPod source (“iPod Mode : ON”) Other source Station Preset Memory 2Enter Preset Memory mode Select “P.MEM” 3Select the number to put in the memory Turn the Control knob 4Determine the number to put in the memory Press the Control knob 5Allow the determined number to take effect Press the Control knob PTY (Program Type) 1 Enter PTY mode Press the Control knob. “PTY SELECT” is displayed 2Select the Program Type 4Exit PTY mode Program Type preset Changing Language for PTY Function Before Use Receiving a call Answering a Phone Call Press the [AUD] knob Rejecting an Incoming Call Making a call 1Enter dialing method mode 2Select a dialing method Press the Control knob 3Exit the dialing method mode Dial a number Registering to the Preset Dial Number Selecting Bluetooth Audio source Pause and play Music Search Push the Control knob towards right or left Security Code 1Select Security Code item during Menu mode (In Standby mode) 2Enter Security Code mode 3Enter Security Code 4Confirm the Security Code Manual Clock Adjustment 1Select Clock Adjustment item during Menu mode (In Standby mode) 2Enter Clock adjustment mode Press the Control knob for at least 1 second. The clock display blinks 3 Adjusting Clock Audio Control Range 1 Select the source to adjust 2Enter Audio Control mode Press the [AUD] knob 3Select the Audio item to adjust Press the [AUD] knob Audio Setup 2Enter Audio Setup mode 3Select the Audio Setup item to adjust Press the [AUD] knob 4Adjust the Audio setup item Turn the [AUD] knob 5Exit Audio Setup mode Audio Preset Memory 1Setup Sound Control Select Audio Preset item during Menu mode (Other than Standby mode) 3Enter Audio Preset mode 4Select the Audio Preset Memory Turn the Control knob Registering Bluetooth device When registering from Bluetooth devices 1Turn on the control unit 2Start registering a unit by operating the Bluetooth device 3Enter a PIN code Registering PIN Code 1Select PIN code edit item during Menu mode (In Standby mode) 2Enter PIN code edit mode 3Input the PIN code 4Register a PIN code Selecting the Bluetooth device You Wish to Connect 1Select Bluetooth device selection item during Menu mode Cell-phone Audio player 4Set up the Bluetooth device Exit the voice tag mode Press the [FNC] button Select a mode Select the category (type) you wish to set Enter voice tag mode Downloading the SMS 3Exit the SMS download mode Press the [FNC] button SMS (Short Message Service) When a new message arrives Displaying the SMS In Tuner source Band select [FM]/[AM] Station select [4]/[¢] Receiving a call Answer the call [] Switch between the private talk mode and the hands-freetalk mode Call waiting About Audio file About USB device About KENWOOD “Music Editor” of PC application About the Cell-Phone About the Bluetooth Audio player Menu Glossary The marking of products using lasers (Except for some areas) For Good Reception Page Connector Function Guide Connecting the ISO Connector Installation Removing the hard rubber frame Removing the Unit Installation the Microphone Unit General Tuner source Disc source Audio file source Bluetooth audio source Hands-free The messages shown below display your systems condition Page FM tuner section MW tuner section LW tuner section Bluetooth section CD player section Audio section Page Page Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC