Listening to the Radio

■Press and hold for about 2 seconds to memorize the current station.

■Press briefly to recall memorized station.

1Press SRC to select “TUNER”.

2Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ AM).

3Press 4 / ¢ to search for a station.

Using the remote controller (RC-405)

#FM+ / *AM– : Selects band.

4/ +¢ : Selects station.

1 – 6

: Selects preset station.

Changing the frequency steps

You can change the frequency step of FM/ AM:

FM : 50 kHz to 200 kHz

AM : 9 kHz to 10 kHz

1Press and hold SRC to turn off the power.

2While pressing number buttons 1 and 5, press SRC.

Release your fingers from the buttons after the display appears.

■To restore the initial setting, repeat the same procedure.

■When the frequency step is changed, the frequencies in the memory are deleted.

Adjust [SETTINGS] mode settings

While listening to the radio...

1Press the volume knob to enter [FUNCTION] mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3Turn the volume knob to make a selection, then press to confirm. See table below for selection.

4Holdto finish the procedure.

Item

Selectable setting (Preset: *)

SEEK MODE

Selects the tuning mode for 4 / ¢ buttons.

 

AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ;

 

MANUAL: Manually search for a station.

AUTO MEMORY

YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing is

 

not activated). (Selectable only if [NORMAL] is selected for [PRESET TYPE].) (page 9)

MONO SET

ON: Improves the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes).

10 English