Operation of Hands-Free Phoning

Preparation : KDC-U4549SD/ KDC-U4549: Only with the optional accessory KCA-BT300 or KCA- BT200 connected.

KDC-U4549SD/ KDC-U4549

■Press and hold to enter Bluetooth mode.

■Press to answer an incoming call.

■Press and hold for about 2 seconds to memorize the current phone number.

■Press briefly to recall memorized phone number.

KDC-U549BT

■Press to enter Bluetooth mode.

■Press to answer an incoming call.

Getting Started

Before use the cell-phone, you need to connect cell-phone to this unit.

■For details on the Bluetooth cell-phone with the hands-free function, see <About the Cell-Phone> (page 26).

KDC-U549BT

1 Press and hold to enter easy pairing mode

“PAIRING” is displayed.

2“SEARCHING” is displayed. Search for the Bluetooth device.

When search is completed, “FINISHED” is displayed.

3Turn the volume knob to select a cell- phone name, press to confirm.

4Input the PIN code

■Turn the volume knob to select the number.

■To move to the next digit, press ¢.

■To delete the last digit, press 4.

5Press the volume knob to transmit the PIN code.

If “PAIRING OK” is displayed, registration is completed.

When “CONFIRM PHONE” is displayed, confirm connection with a cell-phone operation.

6The receiver is connected to a cell-phone, with “HF CONNECT” displayed, and exits the easy pairing mode.

■For more details, see <Easy Pairing function> (page 22).

■If an error code is displayed during paring, see <Troubleshooting> (page 34).

KDC-U4549SD /KDC-U4549

The following 3 steps procedure is necessary.

Step 1. Pairing (Registering from Bluetooth devices)

1Press SRC to turn on the power.

2Start registering this unit by operating the Bluetooth device.

By operating the Bluetooth device, register the hands-free unit (pairing). Select “KCA- BT300” or “KCA-BT200” from the list of connected units.

3Input the PIN code (“0000”) in the Bluetooth device.

Check that registration is complete on the Bluetooth device. PIN code is set to

18 English