Initial settings before operations
1Press SRC to enter [STANDBY] mode.
2Press the volume knob to enter [FUNCTION] mode.
3Turn the volume knob to select [INITIAL SET], then press to enter.
4Turn the volume knob to make a selection, then press to confirm. See table below for selection.
5Holdto finish the procedure.
Item | Selectable setting (Preset: *) |
PRESET TYPE | NORMAL *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ; |
| MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ AM). |
KEY BEEP | ON */ OFF: Activates/deactivates the keypress tone. |
TDF ALARM | ON: Activates the alarm if you forgot to detach the faceplate when ACC is set to OFF. ; OFF *: Cancels. |
ON1 *: Outputs sound of the connected external component through the car speakers when “AUX” is selected as the | |
| source. ; ON2: Outputs sound from the connected external component when “AUX” is selected as the source. When |
| you turn on the power, the sound attenuates (to prevent noise when no external component is connected). Turn the |
| volume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” in source selection. |
CD READ | 1*: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No sound can |
| be heard if an audio file disc is played. |
SWITCH | |
PREOUT | REAR */ |
| the unit (through an external amplifier). |
SP SELECT | OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance. |
F/W UP xx.xx | YES: Starts upgrading the firmware. ; NO *: Cancels (upgrading is not activated). |
| For details on how to update the firmware, see: www.kenwood.com/cs/ce/ |
English 9