Function settings

1Press SRC to select a source other than “STANDBY”.

2Press the volume knob to enter [FUNCTION] mode.

3Turn the volume knob to select [AUDIO CONTROL] or [SETTINGS], then press to enter.

4Turn the volume knob to make a selection, then press to confirm.

See table below for selection.

Repeat step 3 until the desired item is selected/activated.

Press to return to the previous item.

5 Hold

to finish the procedure.

[AUDIO CONTROL] : While listening to any source except in STANDBY state or Bluetooth mode.

 

Item

Selectable setting (Preset: *)

SUB-W LEVEL

–15 — 0 * — +15: Adjusts the subwoofer output level.

BASS BOOST

B.BOOST LV1 */ B.BOOST LV2: Selects your preferred bass boost level. ; OFF: Cancels.

SYSTEM Q

NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to the

 

 

music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)

BASS ADJUST

 

 

BASS CTR FRQ

40/ 50/ 60/ 70/ 80/ 100 */ 120/ 150: Selects the center frequency.

 

BASS LEVEL

–8 — 0 * — +8: Adjusts the level.

 

BASS Q FACTOR

1.00 */ 1.25/ 1.50/ 2.00: Adjusts the quality factor.

 

BASS EXTEND

ON: Turns on the extended bass. ; OFF *: Cancels.

MID ADJUST

 

 

MID CTR FRQ

0.5K/ 1.0K/ 1.5K/ 2.0K *: Selects the center frequency.

 

MID LEVEL

–8 — 0 * — +8: Adjusts the level.

 

MID Q FACTOR

1.00 */ 2.00: Adjusts the quality factor.

TRE ADJUST

 

 

TRE CTR FRQ

10.0K/ 12.5K */ 15.0K/ 17.5K: Selects the center frequency.

 

TRE LEVEL

–8 — 0 * — +8: Adjusts the level.

BALANCE

L15 — 0 * — R15: Adjusts the left and right speaker output balance.

FADER

R15 — 0 * — F15: Adjusts the rear and front speaker output balance.

SUBWOOFER SET

ON *: Turns on the subwoofer output. ; OFF: Cancels.

DETAILED SET

 

 

HPF FRONT

THROUGH *: All signals are sent to the front speaker. ; 40/60/80/100/ 120/150/180/220 (HZ): Frequencies

 

 

lower than the specified value are cut off.

 

HPF REAR

THROUGH *: All signals are sent to the rear speaker. ; 40/60/80/100/ 120/150/180/220 (HZ): Frequencies

 

 

lower than the specified value are cut off.

 

LPF

THROUGH *: All signals are sent to the subwoofer. ; 50/60/80/100/120 (HZ): Frequencies higher than the

 

SUBWOOFER

specified value are cut off.

 

SUB-W PHASE

REVERSE (180°)/ NORMAL (0°) *: Selects the phase angle of the subwoofer output to be in line with the

 

 

speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for

 

 

[LPF SUBWOOFER].)

28 English