then press to confirm.
7“ENTER 1” is displayed. When a beep is heard, say a voice tag within 2 seconds.
8“ENTER 2” is displayed. When a beep is heard, say the same voice tag as that you said in step 7 within 2 seconds. “COMPLETE” is displayed.
9Press the volume knob to return to step 5.
■Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phone book may not be recalled by voice command.
Bluetooth Setup
1
Press to enter Bluetooth mode.
Press and hold the volume knob to enter Bluetooth mode.
2Turn the volume knob to select [SETTINGS], then press to enter.
3Turn the volume knob to make a selection, then press to confirm.
■See table below for selection.
■Repeat step 3 until the desired item is selected/activated.
■ Press | to return to the previous item. |
4 Hold | to finish the procedure. |
■ To exit Bluetooth mode, press SRC.
Item | Selectable setting (Preset: *) |
PAIRING
DEVICE SEARCH Registers a Bluetooth device (pairing). (For details, see page 23.)
PHONE SELECT Selects a
AUDIO SELECT
Selects a Bluetooth audio player connection. (For details, see page 24.)
DEVICE DELETE Cancel registration of the Bluetooth device.
1.Turn the volume knob to select the Bluetooth device, then press to confirm.
2.Turn the volume knob to select “YES”, then press to confirm.
SMS DOWNLOAD Download a short message. (For details, see page 27.)
VOICE TAG
PB NAME EDIT Registers voice for voice recognition and voice to select the Phone number category in Phone book. PN TYPE EDIT (For details, see page 24.)
DETAILED SET
PIN CODE EDIT Specify the PIN code required when registering this unit using the Bluetooth device. By default, “0000” is specified.
1.Turn the volume knob to select the number.
■To move to the next digit, press ¢.
■To delete the last digit, press 4.
2.Press the volume knob to register a PIN code
AUTO ANSWER OFF: Does not answer the phone call automatically. ; 0: Automatically answers the phone call at once. ; 1 – 8 *
Continued to next page
English 25