Item

Selectable setting (Preset: *)

 

RECONNECT

KDC-U549BT only

 

 

ON *: Automatically reconnects the selected Bluetooth device when radio wave becomes strong enough,

 

 

even after it is disconnected. ; OFF: Cancels.

 

 

■ When this function is turned ON, the Bluetooth device is reconnected if it has been disconnected by

 

 

selecting [PHONE SELECT].

 

BT HF /

FRONT *: Outputs audio from the front-left and front-right speakers. ; ALL: Outputs audio from the all

 

BT HF/AUDIO

speakers.

 

CALL BEEP

ON *: You can output a beep from the speaker when a call comes in. ; OFF: Cancels.

 

BT F/W UPDATE

Display the firmware version and update the firmware.

 

MIC GAIN

–3 — 0 * — +3: Adjust the sensitivity of the built-in microphone for a telephone call. Adjust the voice of

 

 

caller. Setting to “+” increases the voice volume.

 

NR LEVEL

–3 — 0 * — +3: Reduce the noises generated by surrounding environment without changing the

 

 

built-in microphone volume. Adjust the voice of caller when it is not clear. Setting to “+” increases the noise

 

 

reduction.

 

EC LEVEL

–2 — 0 * — +2: Adjust the level of echo cancellation. Setting to “+” increases the echo cancel reduction.

■[MIC GAIN], [NR LEVEL], [EC LEVEL] is selectable only for KDC-U549BT and KDC-U4549SD/KDC-U4549 with KCA-BT300.

About the Cell-Phone

■Version: Bluetooth Standard Ver. 2.0

■Profile:

HFP (Hands Free Profile) OPP (Object Push Profile)

PBAP (Phone book Access Profile) SYNC (Synchronization Profile)

For the cell-phones verified for compatibility, access the following URL: www.kenwood.com/cs/ce/bt/

■The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth SIG. However, it may be impossible for such units to communicate with your cell-phone depending on its type.

SMS (Short Message Service)

Preparation : KDC-U4549SD/ KDC-U4549: Only with the optional accessory KCA-BT300 or KCA- BT200 connected.

KDC-U4549SD/ KDC-U4549

KDC-U549BT

Press and hold to enter Bluetooth mode.

Press to enter Bluetooth mode.

26 English