Tuner Operation

Auto Memory Entry

Putting stations with good reception in the memory automatically.

1Enter Auto Memory Entry mode Select “AUTO MEMORY”.

For how to select Function Control items, refer to <Function Control> (page 6).

2Open Auto Memory EntryTurn the [AUD] knob to select “YES”, and then press the [AUD] knob.

When 6 stations that can be received are put in the memory, auto memory entry closes.

Station Preset Memory

Putting a station in the memory.

1Select the frequency to put in the memory Push the [AUD] knob towards right or left.

2Enter Preset Memory mode Press the [SEARCH] button.

3Select the number to put in the memory Turn the [AUD] knob or push it towards up or down.

4Determine the number to put in the memory Press the [AUD] knob for at least 1 second.

Cancelling the Preset Memory mode Press the [SEARCH] button.

Preset Tuning

Recalling the stations in the memory.

1Enter Preset Tuning Select mode Press the [SEARCH] button.

2Select a desired station in the memory Turn the [AUD] knob or push it towards up or down.

3Recall the station Press the [AUD] knob.

Cancelling Preset Tuning

Press the [SEARCH] button.

Function of remote control

Direct Access Tuning

Entering the frequency and tuning.

1Enter Direct Access Tuning modePress the [DIRECT] button on the remote control.

“– – – –” is displayed.

2Enter the frequency

Press the number buttons on the remote control.

Example:

Desired frequency

 

Press button

92.1 MHz (FM)

 

[0], [9], [2], [1]

810 kHz (AM)

[0], [8], [1], [0]

Cancelling Direct Access Tuning

Press the [DIRECT] button on the remote control.

⁄

•You can enter the FM band frequency in steps of a minimum of 0.1 MHz.

14 KDC-BT742U/ KDC-X493/ KDC-MP442U