Kenwood KDC-BT742U, KDC-X493 Operation, Operation type, 3Make a setting, Select “MENU” > “DOT LINE”, 4Exit Function Control mode, 1Enter Function Control mode

1Enter Function Control modePress the [SEARCH] button for at least 1 second. ”FUNCTION” is displayed.2Select your desired setup item

Operation type

Movement between items

Selection of item

Return to previous item

Operation

Turn the [AUD] knob.

Press the [AUD] knob.

Press the [SEARCH] button.

Repeat selection and determination until your desired setup item is selected.

Example:

MENU

DOT LINE

In this manual, the above selection is indicated as

Select “MENU” > “DOT LINE”.3Make a setting

Press the [AUD] knob or turn the [AUD] knob to select a setting value, and then press the [AUD] knob.

•The value of items with mark can be set by press the [AUD] knob.

•The value of items with mark can be set by pushing the [AUD] knob towards right or left.

•Some items require you to keep pressing the [AUD] knob for 1 or 2 seconds so that you can make a setting. For these items, the time during which you need to keep pressing the [AUD] knob is displayed in the Entry column in seconds.

•For the functions accompanied by the description of the setting procedure and so forth, the reference page numbers are displayed.

4Exit Function Control modePress the [SEARCH] button for at least 1 second.

English 9