Function of KDC-BT742U

Bluetooth Setup

Registering Bluetooth device

To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to five Bluetooth devices to this unit.

When registering from Bluetooth devices1Turn on the control unit.2Start registering a unit by operating the Bluetooth device

By operating the Bluetooth device, register the hands-free unit (pairing). Select “KENWOOD BT CD/R-3P2” from the list of connected units.

3Enter a PIN code

Input the PIN code registered as mentioned in <Registering PIN Code> (page 28).

Check that registration is complete on the Bluetooth device.

4By operating the Bluetooth device, start hands- free connection.When registering from this unit

1Enter Bluetooth device registration mode Select “MENU” > “DVC REGIST”.

Press the [AUD] knob for at least 1 second. For how to select Function Control item, refer to <Function Control> (page 6).

Search for the Bluetooth device.

When search is completed, “FINISHED” is displayed.

2Select the Bluetooth device

Turn the [AUD] knob or push it towards up or down to select the Bluetooth device.

Press the [AUD] knob to determine the selection.3Input the PIN code

Operation type

 

Operation

Select the numbers.

 

Turn the [AUD] knob or push it towards

 

 

up or down.

Move to the next digit.

 

Push the [AUD] knob towards right.

Delete the last digit.

 

Push the [AUD] knob towards left.

4Transmit the PIN code

Press the [AUD] knob for at least 1 second. If “PAIRING OK” is displayed, registration is completed.

5Return to the device list Press the [AUD] knob.

6Exit Bluetooth device registration mode Press the [SEARCH] button.

28 KDC-BT742U/ KDC-X493/ KDC-MP442U

⁄

•This unit allows up to eight digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input from the Bluetooth device.

•If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device.

•If the error message appears even though the PIN code is correct, try <Registering Special Bluetooth device> (page 28).

Registering Special Bluetooth device

Allow registration of a special device that cannot be

registered normally (pairing).

1Enter special device registration mode Select “MENU” > “S-DVC SELECT”.

Press the [AUD] knob for at least 1 second. For how to select Function Control item, refer to <Function Control> (page 6).

A list is displayed.

2Select a device name

Turn the [AUD] knob or push it towards up or down to select a device name.

Press the [AUD] knob to determine the selection.

If “COMPLETE” is displayed, registration is completed.

3Go through the procedure of <Registering Bluetooth device> (page 28) and complete the registration (pairing).

Cancelling special device registration mode Press the [SEARCH] button.

⁄

•If the device name is not in the list, select “OTHER PHONE”.

Registering PIN Code

By operating the Bluetooth device, specify the PIN code necessary for registering this unit.

1Enter PIN code edit mode Select “MENU” > “PIN EDIT”.

Press the [AUD] knob for at least 1 second. For how to select Function Control item, refer to <Function Control> (page 6).

The current setting of PIN code is displayed.