Function of KDC-BT742U

Bluetooth Setup

Deleting a Registered Bluetooth device

You can delete a registered Bluetooth device.

1Enter Bluetooth device deletion mode Select “MENU” > “DEVICE DEL”.

Press the [AUD] knob for at least 1 second. For how to select Function Control item, refer to <Function Control> (page 6).

‘(name)’ is displayed.

2Select the Bluetooth device

Turn the [AUD] knob or push it towards up or down.

3Delete the selected Bluetooth device Press the [AUD] knob for at least 1 second.

4Exit the Bluetooth device deletion mode Press the [SEARCH] button.

⁄

•When a registered cell-phone is deleted, its Phone Book, log, SMS, and voice tag are also deleted.

Displaying the Firmware Version

Display the version of the firmware of this unit.

1Enter Bluetooth Firmware update mode Select “MENU” > “BT F/W UPDATE”.

Press the [AUD] knob for at least 1 second. For how to select Function Control item, refer to <Function Control> (page 6).

The firmware version appears.

2Exit Bluetooth Firmware update mode Press the [SEARCH] button.

⁄

•For how to update the firmware, access our website. http://www.kenwood.com/bt/information/

Adding a voice dialing command

Add a voice tag to the phonebook for voice dialing. You can register up to 35 voice tags.

1Enter voice tag modeSelect “MENU” > “VOICE TAG”.

Press the [AUD] knob for at least 1 second. For how to select Function Control item, refer to <Function Control> (page 6).

2Select “PB NAME EDIT” mode

Press the [AUD] knob to select “PB NAME EDIT”, and then press the [AUD] knob for at least 1 second.

3Search for the name to register

Select the name to register with reference to 4 in <Calling a number in the PhoneBook> (page 16). If a voice tag has already been registered for a name, “*” is displayed before the name.

4Select a mode

Turn the [AUD] knob or push it towards up or down.

Display

 

Operation

“PB NAME REG”

 

Register a voice tag.

“PB NAME CHK”*

 

Play a voice tag.

“PB NAME DEL”*

 

Delete a voice tag.

“RETURN”

 

Return to step 2.

*Displayed only when a name for which a voice tag has been registered is selected.

Select “PB NAME REG” (Regist)

5Register a voice tag (first) Press the [AUD] knob. “ENTER1” is displayed.

When a beep is heard, utter a voice tag within 2 seconds.

6Confirm the voice tag (second) Press the [AUD] knob.

“ENTER2” is displayed.

When a beep is heard, utter the same voice tag as that you uttered in step 4 within 2 seconds. “COMPLETE” is displayed.

7End registration Press the [AUD] knob.

Return to step 2. You can register another voice tag continuously.

⁄

•If your voice cannot be recognized, a message is displayed. Pressing the [AUD] knob allows you to retry voice input. (page 44)

30 KDC-BT742U/ KDC-X493/ KDC-MP442U