Audio Adjustments
Audio ControlYou can adjust following Audio Control items ;
Adjustment Item |
| Display |
| Range |
Rear volume |
|
| 0 — 35 | |
Subwoofer level |
|
| ||
Bass Boost* |
| “B.BOOST” |
| “STEP1”/”STEP2”/“OFF” |
|
|
|
| (The indicator turns on |
|
|
|
| according to the setting.) |
System Q* |
| “NATURAL”/“USER”/ |
| Natural/User setting/Rock/ |
|
| “ROCK”/“POPS”/“EA |
| Pops/Easy/Top 40/Jazz/ |
|
| SY”/“TOP40”/“JAZZ” |
| Game |
|
| /”GAME” |
|
|
Bass level* |
| “BASS L” |
| |
Middle level* |
| “MID L” |
| |
Treble level* |
| “TRE L” |
| |
Balance |
| “BALANCE” |
| Left 15 — Right 15 |
Fader |
| “FADER” |
| Rear 15 — Front 15 |
Exit Audio Control mode (Volume control mode)
* Function of
⁄
•Source tone memory: You can set Bass, Middle, and Treble for each source.
•“USER”: The ranges selected lastly for Bass level, Middle level, and Treble level are recalled automatically.
1Select the source to adjust Press the [SRC] button.
2Enter Audio Control mode Press the [AUD] knob.
3Select the Audio item to adjust Press the [AUD] knob.
4Adjust the Audio item Turn the [AUD] knob.
5Exit Audio Control mode Press any button.
Press a button other than the [AUD] knob or [0] button.
Function of
You can adjust the following Basic Audio Items in datail: Bass level, Middle level, and Treble leval.
Bass levelAdjustment Item |
| Display |
| Range |
Bass Center Frequency |
| “BASS F” | 40/50/60/70/80/100/ | |
|
|
|
| 120/150 Hz |
Bass Q Factor |
| “BASS Q” | 1.00/1.25/1.50/2.00 | |
Bass Extend |
| “BASS EXT” |
| OFF/ON |
| Middle level |
|
|
|
|
|
|
|
|
|
Adjustment Item |
| Display |
| Range |
Middle Center Frequency |
| “MID F” |
| 0.5/1.0/1.5/2.0 kHz |
Middle Q Factor |
| “MID Q” | 1.0/2.0 | |
| Treble level |
|
|
|
|
|
|
|
|
|
Adjustment Item |
| Display |
| Range |
Treble Center Frequency |
| “TRE F” |
| 10.0/12.5/15.0/17.5 kHz |
For how to select Basic Audio items, see <Audio Control> (page 20).
2Enter Detail adjustment mode of Audio ControlPress the [AUD] knob for at least 1 second.
3Select the Detail Audio item to adjust Press the [AUD] knob.4Adjust the Detail Audio item Turn the [AUD] knob.
5Exit the Detail Audio Control mode Press the [AUD] knob for at least 1 second.
⁄
•When you set the Bass Extend to ON, low frequency response is extended by 20%.
•You can exit the Audio Control mode at anytime by pressing any button except for [AUD] knob or [0] button.
20