1Enter dialing method mode Press the [] button.
2Select the call log mode Press the [AUD] knob.
Select the
Turn the [AUD] knob or push it towards up or down.
4Make a callPress the [AUD] knob for at least 1 second.
⁄
•The outgoing call list and the incoming call list, and the missed call list are the lists of calls originated from and received at this unit. They are not the ones stored in the
1Enter the phone number you wish to register Enter the phone number with reference to the following:
Dial a number/ Calling a number in the call log/ Calling a number in the Phone Book
2Enter Preset Memory mode Press the [SEARCH] button.
3Select the number to put in the memory Turn the [AUD] knob or push it towards up or down.
4Determine the number to put in the memory Press the [AUD] knob for at least 1 second.
Exit the Preset Memory modePress the [SEARCH] button.
1Enter voice recognize mode Select “MENU” > “VOICE RECOG”.
For how to select Function Control item, refer to <Function Control> (page 6).
2Press the [AUD] knob. “PB NAME” is displayed.
When a beep is heard, utter the name within 1 second.
3“PN TYPE” is displayed.When a beep is heard, utter the category within 1 second.
4Make a call
Press the [AUD] knob for at least 1 second.
•This step is the same as step 3 of the procedure in <Calling a number in the Phone Book>. You can make a call or select a category.
⁄
•If your voice cannot be recognized, a message is displayed. Pressing the [AUD] knob allows you to retry voice input. (page 44)
•Both the name and category requires registration of a voice tag. (page 30)
•Audio sound is not output during voice recognize.
The category items in the Phone Book are displayed as follows:
DisplayInformation“GENERAL”General
“HOME”Home
“OFFICE”Office
“MOBILE”Mobile
“OTHER”Other
English 17