GETTING STARTED

When you turn on the power (or after you reset the unit), the display

shows: //CANCEL DEMO''.. //PRESS// .. 'VOLUMEKNOB//

1Press the volume knob.

[YES] is selected for the initial setup.

2Press the volume knob again. //DEMO OFF// appears.

1Press the volume knob to enter [FUNOION).

2Turn the volume knob to select [SETTINGS], then press the knob.

3Turn the volume knob to select [CLOCK], then press the knob.

4Turn the volume knob to select [CLOCK ADJUST]/ [CLOCK ADJ], then press the knob.

5Turn the volume knob to adjust the hour, then press the knob.

6Turn the volume knob to adjust the minute, then press the knob. Press~ I~ to move between the hour and minute adjustment.

7Press and hold ~ to exit.

(or) ------------------------------------------~

Press and hold SCRL DISP to enter clock adjustment mode directly while in clock display screen.

Then, perform steps 5 and 6 above to set the clock.

1Press t!> SRC to enter [STANDBY).

2Press the volume knob to enter [FUNOION).

3Turn the volume knob to select [INITIAL SET), then press the knob.

4Turn the volume knob to make a selection (see the following table), then

press the knob.

5Press and hold~ to exit.

To return to the previous hierarchy, press~.

Default: XX

PRESET TYPE

NORMAL/ NORM: Memorizes one station for each preset button in each band (FM1/

 

FM2/ FM3/ AM).; MIX: Memorizes one station or SiriusXM channel for each preset

 

button regardless of the selected band or SiriusXM channel.

KEY BEEP

ON: Activates the keypress tone. ; OFF: Deactivates.

PANDORASRC

13•Iti!Jett4t •~olii:Jie1e1e11J:

 

ON: Enables PANDORA in source selection.; OFF: Disables.(~ 8)

BUILT-IN AUX/

ON: Enables AUXin source selection.; OFF: Disables.(~ 7)

BUILTIN AUX

 

CD READ

1: Automatically distinguishes between audio file disc and music CD.; 2: Forces to play

 

as amusic CD. No sound can be heard if an audio file disc is played.

SWITCH PRE

l:i•M:iite1e11l:

 

REAR/ SUB-W:Selects whether rear speakers or asubwoofer are connected to the

 

line out terminals on the rear (through an external amplifier).

SP SELECT

OFF/ 5/4/ 6 x 9/6/ OEM: Selects according to the speaker size (5 inches or

 

4 inches, 6x9 inches or 6 inches) or OEM speakers for optimum performance.

F/W UP xx.xx

YES: Starts upgrading the firmware.; NO: Cancels (upgrading is not activated).

 

For details on how to update the firmware, see: www.kenwood.com/cs/ce/

4

Page 4
Image 4
Kenwood KDC-X597 YES is selected for the initial setup, To return to the previous hierarchy, press~ Default