Audio Adjustments
Audio Control
You can adjust following Audio Control items ;
Adjustment Item |
| Display |
| Range |
Rear volume |
|
| 0 — 35 | |
AV output volume |
| “AVVOL” |
| 0 — 35 |
Subwoofer level |
| “SW L” |
| |
Balance |
| “BAL” |
| Left 15 — Right 15 |
Fader |
| “FAD” |
| Rear 15 — Front 15 |
Exit Audio Control mode (Volume control mode)
1Select the source to adjust Press the [SRC] button.
2Enter Audio Control mode Press the [AUD] knob.3Select the Audio item to adjust Press the [AUD] knob.4Adjust the Audio item Turn the [AUD] knob.5Exit Audio Control mode Press any button.Press a button other than the [AUD] knob or [0] button.
•AV output source
The sub source (DVD, USB) can be output to the AV output separately from the main source.
-Set the preout to “AV” in “MENU” > “SWPRE” (page 10) of <Function Control>.
-Adjust the volume of AV output source by <Audio Control> (page 25).
-“USB” and “DVD” cannot be set at the same time for the main and AV output sources.
•Dual Zone System and the AV output source cannot be used at the same time. Turn off the setting currently used and then set the next function.
1Select the source to adjust Press the [SRC] button.
2Enter Audio Setup modePress the [AUD] knob for at least 1 second.
3Select the Audio Setup item to adjust Press the [AUD] knob.4Adjust the Audio setup item Turn the [AUD] knob.5Exit Audio Setup modePress the [AUD] knob for at least 1 second.
Audio Setup
You can set Sound system, such as follows;
Adjustment Item |
| Display |
| Range |
Volume offset |
|
| ||
Dual Zone System |
| “2ZON” |
| OFF/ DVD/ USB/ AUX |
AV output source |
| “AV/O” |
| OFF/ DVD/ USB |
⁄
•Volume offset: Sets each source’s volume as a difference from the basic volume.
•Dual Zone System
Main source and sub source (DVD, USB, AUX) output Front channel and Rear channel separately.
-Set the preout to “R” or “SW” in “MENU” > “SWPRE” (page 10) of <Function Control>.
-Set up the channel of sub source by “ZONE2” of <Function Control> (page 11).
-Select Main source by [SRC] button.
-Adjust the volume of Front channel by [AUD] knob.
-Adjust the volume of Rear channel by <Audio Control> (page 25) or [5]/[∞] button on the remote control (page 30).
-The Audio Control has no effect on sub source.
-“USB” and “DVD” cannot be set at the same time for the main and sub sources.
Preset Equalizer Select
You can select following Equalizer curve;
Preset Equalizer | Display |
| Preset Equalizer | Display | ||
|
|
|
|
|
|
|
User* | “USER” |
| Jazz | “JAZZ” | ||
|
|
|
|
|
|
|
Rock | “ROCK” |
| Game | “GAME” | ||
|
|
|
|
|
|
|
Pops |
| “POPS” |
| iPod (During iPod | “iPod” | |
Easy | “EASY” |
| source only) |
|
| |
|
|
|
| Natural | “NATURAL” | |
Top 40 | “TOP40” | |||||
|
|
|
|
|
|
|
* The Equalizer curve set in the section <Manual Equalizer Control> is recalled.
1 Enter Preset Equalizer modePress [ ] 1 sec., and select “DSP” > “CONTROL” > “EQ” > “PRESET”.Press the [AUD] knob.
•For how to select Function Control items, refer to <Function Control> (page 11).
2Select the Equalizer curveTurn the [AUD] knob and push the center when the desired item is displayed.You can select from 22 Equalizer curve types for iPod when “iPod” is selected.
Next page 3
English 25