For first use
Before using this unit for the first time
Demonstration mode setting
This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode setting.
Display |
| Setting |
“DEMO ON” |
| The Demonstration mode function is ON. |
“DEMO OFF” |
| Cancel Demonstration mode (Normal mode). |
TV system selection
You must select the appropriate system mode for your TV system. When the selected system does not coincide with the system of your TV, normal color picture may not be displayed.
Display |
| Setting |
“P/N PAL” |
| Select when the unit is connected with |
“P/N NTSC” |
| Select when the unit is connected with |
1Select Standby
Press the [SRC] button. Select the “STANDBY” display.
2Enter Function Control mode
Press the [ ] button for at least 1 second.
“FUNCTION” is displayed.
3Enter Menu mode
Turn the [AUD] knob to select “MENU”. Press the [AUD] knob.
4Set the Demonstration mode
Turn the [AUD] knob to select “DEMO”. Press the [AUD] knob for at least 2 seconds. Select the “DEMO OFF” display.
5Set the TV system
Turn the [AUD] knob to select “P/N”. Press the [4] or [¢] button.
6Exit Function Control mode
Press the [ ] button for at least 1 second.
7Turning OFF the Power
Press the [SRC] button for at least 1 second.
⁄
• These settings can be changed later.
Language Setup
Set a language used for screen display, DVD subtitles, etc.
• “LANGUAGE” item of the Setup menu (page 13)
DSP Setup
To get clear sound, set the sound environment according to the location and size of physically installed speakers with reference to the followings:
•“MENU” > “SWPRE” of <Function Control> (page 10)
•Cabin selection (page 27)
•Speaker Setting (page 27)
•DTA (Digital Time Alignment) setting (page 28)
•X’Over setting (page 28)
⁄
•Setting “DSP SET” to “BYPASS” disables the settings related to the DSP function. Refer to “DSP” > “DSP SET” of <Function Control> (page 11).
English 7