Kenwood KDV-U4349, KDV-U4349M, KDV-U4449 Manual Equalizer Control, Position Control, Range, Display, Display, Display, Display, 4Set the value, 3Set the value, Adjustment Item, Press the [ ] button

Audio Adjustments

Select the iPod Equalizer curve

1.Enter iPod Equalizer mode Press the [AUD] knob.

2.Select the iPod Equalizer curve

Turn the [AUD] knob and push the center when the desired item is displayed.

3Exit Preset Equalizer mode.

Press the [ ] button.

⁄

• You can select for each source.

Manual Equalizer Control

You can adjust following Equalizer Control items;

Adjustment Item	Range
Band level “BAND#” >“GAIN”	-9 – 0 – +9
Bass Effect* “BAND1” >“EFFECT”	“OFF”/ “ON”

• *Can be only set for “BAND1”.

1 Enter Manual Equalizer Control modePress [ ] 1 sec., and select “DSP” > “CONTROL” > “EQ” > “MANUAL”.

Press the [AUD] knob.

•For how to select Function Control items, refer to <Function Control> (page 10).

2Select the band you want to setTurn the [AUD] knob and push the center. “BAND1” – “BAND5”3Select the item you want to setTurn the [AUD] knob and push the center.4Set the value

Turn the [AUD] knob and push the center when the desired item is displayed.

5Exit Manual Equalizer Control modePress the [ ] button twice.

⁄

•When “iPod” is selected in the section <Preset Equalizer select> (page 25), Manual Equalizer Control is disabled.

•You can select for each source.

Position Control

According to the listening position, select the position from the following settings so that the normal position of the sound environment can be compensated in accordance with the selected position;

26 KDV-U4349/ KDV-U4349M/ KDV-U4449

Preset position “PRESET”
	Adjustment Item		Display	Adjustment Item		Display
	Not compensating.		“ALL”	Front-Right seat		“F-RIGHT”
	Front-Left seat	“F-LEFT”		Front seat	“F-ALL”
Manual position “MANUAL”
	Adjustment Item		Display	Adjustment Item		Display
	Front Left speaker	“F-LEFT”		Subwoofer Left		“SW-LEFT”
	Front Right speaker		“F-RIGHT”	Subwoofer Right		“SW-RIGHT”
	Rear Left speaker		“R-LEFT”	Initialize the setting	“INITIAL”
	Rear Right speaker	“R-RIGHT”		values.

1Enter Preset position setting modePress [ ] 1 sec., and select “DSP” > “CONTROL” > “POSITION” > “PRESET”.

Press the [AUD] knob.

•For how to select Function Control items, refer to <Function Control> (page 10).

2Select the seat you want to compensate

Turn the [AUD] knob and push the center when the desired item is displayed.

3Exit Preset position setting mode

Press the [ ] button.

You can fine-adjust your listening position.1Enter Manual position adjust modePress [ ] 1 sec., and select “DSP” > “CONTROL” > “POSITION” > “MANUAL”.

Press the [AUD] knob.

2Select the speaker you want to set

Turn the [AUD] knob and push the center.

✍Selecting “INITIAL” initializes the Manual position adjustment.

3Set the valueTurn the [AUD] knob and push the center when the desired value is displayed.

Adjust between 0 and 170 cm.

4Exit Manual position adjust mode

Press the [ ] button twice.

⁄

•About the position setting

First, set the using environment with <DTA (Digital Time Alignment) Setting> (page 28).

•When using the Subwoofer Left and Subwoofer Right as a single sub woofer, set the left side and right side to the same value.